Pepperl+Fuchs 421388

DF20/B/49/124

Print mark color sensor

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

Print mark color sensor, 9.5 mm detection range, RGB light with circular light spot, external Teach-In, Teach-In button, NPN output, PNP output, M12 plug, Diffuse mode sensor for recording colored print marks on backgrounds with different colors, TEACH-IN procedure for automatic threshold value setting, 3 emitter colors: green, red and blue, Very short response time, Optical system exchangeable by 90°fa

Technical parameters

Sensor range: 9.5 mm ± 2 mm
Light source: 3 LEDs (R,G,B)
Light type: Visible green/red/blue, modulated light
Light spot representation: Light spot diameter 1.5 mm
Angle deviation: max. ± 3°
MTTFd: 650 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Function indicator: LED yellow, lights up if print mark is detected flashes, if no safe operation is possible
Control elements: Teach-In key
Operating voltage: 10 ... 30 V DC
Ripple: 10 %
No-load supply current: ≤ 55 mA
Function input: Teach-In input
Switching type: PNP switches according to +UB, NPN according to 0 V for detected mark
Signal output: 1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching
Switching voltage: PNP: ≥ (+UB -2.5 V) , NPN: ≤ 1.5 V
Switching current: max. 200 mA
Switching frequency: 1.65 kHz
Response time: 300 µs
Product standard: EN 60947-5-2
CCC approval: CCC approval / marking not required for products rated ≤36 V
Approvals: CE
Ambient temperature: -20 ... 60 °C (-4 ... 140 °F)
Storage temperature: -20 ... 75 °C (-4 ... 167 °F)
Housing width: 33 mm
Housing height: 85.5 mm
Housing depth: 60.8 mm
Degree of protection: IP67
Connection: 5-pin, M12 x 1 connector
Material: Housing: PC (glass-fiber-reinforced Makrolon)
Material: Optical face: glass
Mass: 200 g

Logistic parameters

ECCN:
Country of Origin: Singapur
EAN: 4050143127344
Weight: 0.18 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m