2500980000
SCS 24VDC P1SIL3DS I
| Type: | SCS 24VDC P1SIL3DS I |
| Order No.: | 2500980000 |
| Version: | SAFESERIES, Safety relay,24 V DC (16...36 V DC), , Max. switching current, internal fuse : 5 A, SIL 3, EN 61508:2010 |
| GTIN (EAN): | 4050118514322 |
| Qty.: | 1 pc(s). |
| Width: | 22.5 mm |
| Width (inches): | 0.886 inch |
| Height: | 117.3 mm |
| Height (inches): | 4.618 inch |
| Depth: | 114.1 mm |
| Depth (inches): | 4.492 inch |
| Net weight: | 0.001 g |
| Humidity: | 95 %, no condensation |
| Operating temperature, max.: | 50 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 ° C |
| Storage temperature, min.: | -40 ° C |
| Operating temperature: | -25 °C...50 °C |
| Storage temperature: | -40 ° C...85 ° C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V DC (16...36 V DC) |
| Current consumption: | 50 mA |
| Status indicator: | LED yellow |
| Protective circuit: | Reverse polarity protection, Free-wheeling diode |
| Contact base material: | AgNi |
| Contact design: | NO contact |
| Max. permitted switching voltage: | 250 V AC / 30 V DC |
| Max. permitted switching current: | 5 A |
| Max. switching current, internal fuse: | 5 A |
| Max. switching current, external fuse: | 5 A |
| Max. switching capacity: | 2000 VA |
| Internal fuse: | 5 A time-lag |
| External back-up fuse: | 5 A time lag |
| Short circuit resistance: | No |
| Switch-on time: | ≤ 25 ms |
| Switch-off time: | ≤ 30 ms |
| Min. switching capacity: | 10 mA @ 12 V |
| Device type: | A |
| Hardware fault tolerance (HFT): | 2 |
| Tproof: | 12 Years |
| Safety category: | SIL 3 |
| Safety standard: | EN 61508:2010 |
| Rail: | TS 35 |
| Colour: | black, yellow |
| Resistance to vibration: | DNVGL-CG-0339, class A |
| Insulation coordination according to: | EN 61010-2-201:2013 + AC:2013 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Type of isolation at input and output: | reinforced insulation |
| Creepage and clearance distance input – output: | ≥ 6 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Standards: | EN 61010-2-201:2013 + AC:2013, EN 61326-1:2013, EN 61326-3-1:2008, EN 61326-3-2:2008 |
| Certificate no. (cULus): | E141197 |
| Wire connection method: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.13 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| Blade size: | size PH0 |
| ETIM 6.0: | EC001449 |
| ETIM 7.0: | EC001449 |
| eClass 9.0: | 27-37-18-19 |
| eClass 9.1: | 27-37-18-19 |
| eClass 10.0: | 27-37-18-19 |
| ROHS: | Conform |
| Type: | SCS 24VDC P1SIL3DS I |
| Order No.: | 2500980000 |
| Version: | SAFESERIES, Safety relay,24 V DC (16...36 V DC), , Max. switching current, internal fuse : 5 A, SIL 3, EN 61508:2010 |
| GTIN (EAN): | 4050118514322 |
| Qty.: | 1 pc(s). |
| Width: | 22.5 mm |
| Width (inches): | 0.886 inch |
| Height: | 117.3 mm |
| Height (inches): | 4.618 inch |
| Depth: | 114.1 mm |
| Depth (inches): | 4.492 inch |
| Net weight: | 0.001 g |
| Humidity: | 95 %, no condensation |
| Operating temperature, max.: | 50 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 ° C |
| Storage temperature, min.: | -40 ° C |
| Operating temperature: | -25 °C...50 °C |
| Storage temperature: | -40 ° C...85 ° C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V DC (16...36 V DC) |
| Current consumption: | 50 mA |
| Status indicator: | LED yellow |
| Protective circuit: | Reverse polarity protection, Free-wheeling diode |
| Contact base material: | AgNi |
| Contact design: | NO contact |
| Max. permitted switching voltage: | 250 V AC / 30 V DC |
| Max. permitted switching current: | 5 A |
| Max. switching current, internal fuse: | 5 A |
| Max. switching current, external fuse: | 5 A |
| Max. switching capacity: | 2000 VA |
| Internal fuse: | 5 A time-lag |
| External back-up fuse: | 5 A time lag |
| Short circuit resistance: | No |
| Switch-on time: | ≤ 25 ms |
| Switch-off time: | ≤ 30 ms |
| Min. switching capacity: | 10 mA @ 12 V |
| Device type: | A |
| Hardware fault tolerance (HFT): | 2 |
| Tproof: | 12 Years |
| Safety category: | SIL 3 |
| Safety standard: | EN 61508:2010 |
| Rail: | TS 35 |
| Colour: | black, yellow |
| Resistance to vibration: | DNVGL-CG-0339, class A |
| Insulation coordination according to: | EN 61010-2-201:2013 + AC:2013 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Type of isolation at input and output: | reinforced insulation |
| Creepage and clearance distance input – output: | ≥ 6 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Standards: | EN 61010-2-201:2013 + AC:2013, EN 61326-1:2013, EN 61326-3-1:2008, EN 61326-3-2:2008 |
| Certificate no. (cULus): | E141197 |
| Wire connection method: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.13 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| Blade size: | size PH0 |
| ETIM 6.0: | EC001449 |
| ETIM 7.0: | EC001449 |
| eClass 9.0: | 27-37-18-19 |
| eClass 9.1: | 27-37-18-19 |
| eClass 10.0: | 27-37-18-19 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.19 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |