View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
316607-0002
NBB30-U1K-A0
Request a Quote
Pepperl+Fuchs 316607-0002
NBB30-U1K-A0
Inductive sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Inductive sensors with active shielding technology detect in addition to the damping element also the installation environment. As a result, they keep the operating distance constantly high, regardless of the installation situation and the installation material. Series: VariKont ®, Housing material: PA, Output type: 4-wire, Installation: flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68 / IP69fa
Technical parameters
| Switching function: | complementary |
| Output type: | NPN |
| Rated operating distance: | 30 mm |
| Installation: | flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 24.3 mm |
| Actual operating distance: | 27 ... 33 mm typ. |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.37 |
| Reduction factor r304: | 0.76 |
| Reduction factor rBrass: | 0.46 |
| Output type: | 4-wire |
| Operating voltage: | 10 ... 30 V DC |
| Switching frequency: | 0 ... 60 Hz |
| Hysteresis: | typ. 2 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 2 V |
| Operating current: | 0 ... 200 mA |
| Off-state current: | 0 ... 0.5 mA |
| No-load supply current: | ≤ 20 mA |
| Time delay before availability: | 80 ms |
| Operating voltage indicator: | LED, green |
| Switching state indicator: | LED, yellow |
| MTTFd: | 910 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | screw terminals |
| Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section: | up to 2.5 mm2 |
| Standard conformity: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| Standard conformity: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Housing material: | PA |
| Sensing face: | PA |
| Housing base: | plastic |
| Degree of protection: | IP68 / IP69 |
| Mass: | 225 g |
| Note: | Tightening torque: 1.8 Nm (housing) |
Logistic parameters
| ECCN: | |
| Country of Origin: | CZ |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |