View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
286050
S1SD-1FI-1R
Request a Quote
Pepperl+Fuchs 286050
S1SD-1FI-1R
Rotation Speed Monitor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
This signal conditioner provides the galvanic isolation between field circuits and control circuits. 1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz .. 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa. The device monitors the overspeed condition and the underspeed condition of a digital signal. The device has an input for the following digital signals:. Mechanical contacts. 2-wire sensors (NAMUR, SN, DC, S0). 3-wire sensors (NPN, PNP). AC/DC voltage sources (magnetic sensors), custom-specific setting. The input is reverse polarity protected and short-circuit proofed. The connected sensors can also be supplied externally. The device compares the input frequency with a user-specified reference frequency. An overspeed condition or an underspeed condition is signaled via the relay contact outputs. A fault is indicated by a red LED. The device is easily configured by the use of DIP switches or software. The device can be powered via terminals or Power Bus.
Technical parameters
| Signal type: | Digital Input |
| Connection: | Power Bus or terminals 1-, 2+ |
| Rated voltage: | 16.8 ... 31.2 V DC |
| Power dissipation: | 0.6 W |
| Power consumption: | 1.1 W |
| Programming interface: | programming socket |
| Connection side: | field side |
| NAMUR sensor: Type: | 2-wire |
| NAMUR sensor: Connection: | terminals 5+, 6 |
| NAMUR sensor: Signal: | acc. to EN 60947-5-6 (NAMUR) |
| NAMUR sensor: Sensor supply: | 8 V |
| NAMUR sensor: Open-circuit: | < 0.1 mA |
| NAMUR sensor: Switching point: | 1.2 ... 2.1 mA |
| NAMUR sensor: Short-circuit: | > 6 mA |
| NAMUR sensor: Input impedance: | 1 kΩ |
| Mechanical contact: Type: | 2-wire |
| Mechanical contact: Connection: | terminals 5+, 6 |
| Mechanical contact: Sensor supply: | 15 V |
| Mechanical contact: External supply: | ≤ 32 V |
| Mechanical contact: Switching point: | 8 ... 10 V / 1.2 ... 2.1 mA |
| Mechanical contact: Frequency: | 0 ... 50 Hz , debounce filter |
| Mechanical contact: Input impedance: | 4 kΩ |
| SN sensor: Type: | 2-wire |
| SN sensor: Connection: | terminals 5+, 6 |
| SN sensor: Sensor supply: | 8 V |
| SN sensor: Open-circuit: | < 0.1 mA |
| SN sensor: Switching point: | 1.2 ... 2.1 mA |
| SN sensor: Short-circuit: | > 6 mA |
| SN sensor: Input impedance: | 1 kΩ |
| 2-wire DC sensor: Type: | 2-wire |
| 2-wire DC sensor: Connection: | terminals 5+, 6 |
| 2-wire DC sensor: Signal: | acc. to EN 60947-5-2 |
| 2-wire DC sensor: Sensor supply: | 16 V / 25 mA , short-circuit protected |
| 2-wire DC sensor: External supply: | ≤ 32 V |
| 2-wire DC sensor: Switching point: | 2 ... 5 mA |
| 2-wire DC sensor: Input impedance: | 1 kΩ |
| S0 sensor: Type: | 2-wire |
| S0 sensor: Connection: | terminals 5+, 6 |
| S0 sensor: Signal: | acc. to EN 62053-31 , Type B |
| S0 sensor: Sensor supply: | 15 V |
| S0 sensor: Switching point: | 0.15 ... 2 mA |
| S0 sensor: Input impedance: | 4 kΩ |
| NPN sensor: Type: | 3-wire |
| NPN sensor: Connection: | terminals 5+, 6, 7- |
| NPN sensor: Signal: | acc. to EN 60947-5-2 |
| NPN sensor: Sensor supply: | 16 V / 25 mA , short-circuit protected |
| NPN sensor: External supply: | ≤ 32 V |
| NPN sensor: Switching point: | 3 ... 5 V |
| NPN sensor: Input impedance: | 4 kΩ |
| PNP sensor: Type: | 3-wire |
| PNP sensor: Connection: | terminals 5+, 6, 7- |
| PNP sensor: Signal: | acc. to EN 60947-5-2 |
| PNP sensor: Sensor supply: | 16 V / 25 mA , short-circuit protected |
| PNP sensor: External supply: | ≤ 32 V |
| PNP sensor: Switching point: | 8 ... 10 V |
| PNP sensor: Input impedance: | 4 kΩ |
| AC/DC voltage source: Connection: | terminals 6, 7- |
| AC/DC voltage source: Signal: | max. ± 30 V |
| AC/DC voltage source: Switching point: | 150 ... 400 mV |
| AC/DC voltage source: Input impedance: | 4 kΩ |
| Function input: Connection: | terminal 8 |
| Function input: Open loop voltage: | 7.5 V |
| Function input: Input impedance: | approx. 50 kΩ |
| Function input: Function 1: | activation start-up override |
| Function input: Switching point: | < 3 V , edge triggered |
| Function input: Adjustment range: | 1 ... 6500 s |
| Function input: Function 2: | reset restart inhibit |
| Function input: Switching point: | > 12 V , edge triggered |
| Connection side: | control side |
| Connection: | terminals 3, 4: |
| Output: | signal, relay |
| Contact loading: | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/4 A/cos φ > 0.7; 30 V DC/2 A resistive load |
| Minimum switch current: | 2 mA / 24 V DC |
| Energized/De-energized delay: | ≤ 20 ms / ≤ 20 ms |
| Mechanical life: | 107 switching cycles |
| Accuracy: | max. 0.1 % of the measurement value |
| Measuring time: | ≤ 100 ms |
| Influence of ambient temperature: | < 100 ppm/K of the measured value |
| Frequency range: | 0.01 ... 50000 Hz |
| Output/power supply: | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Input/Other circuits: | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Display elements: | LEDs |
| Control elements: | DIP-switch |
| Configuration: | via DIP switches via software |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | EN 61010-1:2010 |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Damaging gas: | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Core cross-section: | 0.5 ... 2.5 mm2 (20 ... 14 AWG) |
| Mass: | approx. 60 g |
| Dimensions: | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Optional accessories: | power feed module S1SD-2PF adapter with USB interface S-ADP-USB Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP splitter VAZ-CHAIN-BU/BN70MM/1,0-25 |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |