Pepperl+Fuchs 244950

VBA-2A-G10-E2L-1M-2V1-W

AS-Interface actuator module

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

The AS-Interface G10 ultra-compact output-module is suitable for the remote connection of actuators within very limited space. The one-piece enclosure has the protection degree IP68/IP69K. G10 ultra compact module. 2 outputsfa. The AS-Interface flat cable is contacted via pointy, gold-plated contact pins. The exact location of the pins on the lead is ensured by the swivel mechanism. Sensors and actuators are connected to the module via M12 sockets. Multiple LEDs indicate the current status of the AS-Interface strand and the outputs and are used for diagnosis. The outputs of the ultra-compact module are powered from UAUX.

Technical parameters

Slave type: A/B slave
AS-Interface specification: V3.0
Required master specification: ≥ V2.1
UL File Number: E223772 "For use in NFPA 79 Applications only"
MTTFd: 516 a
LED FAULT: error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing
LED AS-i: AS-Interface voltage; LED green
LED OUT: Switching state (output); 2 LED yellow
Auxiliary voltage: 20 ... 30 V DC PELV
Rated operating voltage: 18.5 ... 31.6 V from AS-Interface
Rated operating current: ≤ 40 mA / max. 60 mA
Protection class: III
Surge protection: UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)
Number/Type: 2 electronic outputs, PNP, overload and short-circuit proof
Supply: from external auxiliary voltage UAUX
Current: 2 A per output, TB ≤ 40°C: 4 A total, 40°C < TB ≤ 70°C: 3 A total , overload and short-circuit protected
Voltage: ≥ (UAUX - 0.5 V)
Electromagnetic compatibility: Directive 2014/30/EU: EN 62026-2:2013
Degree of protection: EN 60529:2000
Fieldbus standard: EN 62026-2:2013
Electrical safety: IEC 61140:2004
Emitted interference: EN 61000-6-4:2007
AS-Interface: EN 62026-2:2013
Noise immunity: EN 61000-6-2:2005 EN 62026-2:2013
Profile: S-8.A.E
IO code: 8
ID code: A
ID1 code: 7
ID2 code: E
Data bits (function via AS-Interface): input output
Electromagnetic compatibility: D0: - OUT1
Electromagnetic compatibility: D1: - OUT2
Electromagnetic compatibility: D2: - -
Electromagnetic compatibility: D3: - -
Parameter bits (programmable via AS-i): function
Electromagnetic compatibility: P0: communication monitoring P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition
Electromagnetic compatibility: P1: not used
Electromagnetic compatibility: P2: Lead breakage outputs P2 = 0 lead breakage on P2 = 1 lead breakage off (default settings)
Electromagnetic compatibility: P3: not used
UL approval: cULus Listed, Type 1 enclosure
Electromagnetic compatibility: Maximum permissible ambient temperature: max. 65 °C (max. 149 °F)
Ambient temperature: -40 ... 70 °C (-40 ... 158 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Shock and impact resistance: 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks
Vibration resistance: 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Degree of protection: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-*
Connection: AS-Interface/UAUX: AS-Interface flat cable Outputs & matching connector: M12 round connector, 4-pin, A-coded, according to IEC 61076-2-101:2012
Material: Contacts: CuSn / Au
Material: Housing: PBT PC
Material: Body: black PUR
Material: Cable: PUR
Material: Mounting screw: Stainless steel 1.4305 / AISI 303
Cable: Sheath diameter: ∅4,3 mm
Cable: Color: black
Cable: Cores: 3 x 0.34 mm2
Cable: Length: 1 m
Mass: 100 g
Tightening torque, fastening screws: 1.65 Nm
Tightening torque, cable gland: 0.4 Nm

Logistic parameters

ECCN:
Country of Origin: Indonesien
EAN: 4050143039760
Weight: 0.11 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m