View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
211734
WHA-UT-F7B1-0-PP-Z1-Ex2
Request a Quote
Pepperl+Fuchs 211734
WHA-UT-F7B1-0-PP-Z1-Ex2
WirelessHART
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
The device is designed to connect RTDs or thermocouples from the hazardous area and provide the according temperature values into a WirelessHART network. It has an internal cold junction compensation for thermocouples. A fault is indicated by a red flashing LED per NAMUR NE44. The unit is easily configurable with a configuration tool (DTM). For additional information, refer to the manual and www.pepperl-fuchs.com.
Technical parameters
| Rated voltage: | 3.6 V DC , battery operated |
| Power dissipation/power consumption: | < 0.09 W |
| Connection: | terminals 1, 2, 3, 4 |
| RTD: | type Pt100, Pt1000 (IEC 751: 1995; GOST: alpha = 0.391) |
| : Connection: | 2-wire: 2 sensors, 3- or 4-wire: 1 sensor |
| : Lead resistance: | max. 10 Ω |
| : Measurement loop monitoring: | sensor breakage |
| Thermocouples: | type E, J, K, T (IEC 584-1) |
| : Cold junction compensation: | internal , external |
| : Measurement loop monitoring: | sensor breakage |
| : Measurement range: | type K: -270 ... 1370 °C type T: -270 ... 400 °C type E: -270 ... 1000 °C type J: -210 ... 1200 °C |
| Resistor: Measurement range: | 0 ... 500 Ω , 0 ... 4000 Ω |
| Voltage: | mV Input |
| Resistor: Measurement range: | -100 ... 100 mV , 0 ... 300 mV |
| Input resistance: | ≥ 1 MΩ |
| Interface: | internal antenna |
| Output variables: | PV: input 1 (°C, Ω, mV) SV: input 2 (°C, Ω, mV) TV: CJC temperature (°C) estimated battery life (days) battery voltage (volts) residual battery capacity (%) |
| Communication: | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - transmission rate: 250 kBit/s - maximum transmit power: +10 dBm (EIRP) - transmission range: outdoor 250 m, indoor 50 m (under reference conditions) - communication standard: WirelessHART |
| Temperature measuring range: | sensor type: - TC type E: -200 ... 1000 °C, accuracy ± 0,5 °C - TC type J: -200 ... 750 °C, accuracy ± 1 °C - TC type T: -200 ... 400 °C, accuracy ± 1 °C - TC type K: -140 ... 1300 °C, accuracy ± 1 °C - RTD type Pt100: -200 ... 850 °C, accuracy ± 0,5 °C - 100 mV, accuracy ± 20 µV - 300 mV, accuracy ± 40 µV |
| Accuracy: | - internal cold junction compensation error ± 1,5 °C (typ. acc. to IEC 61298-3) - external cold junction compensation error ± 1 °C (typ.) - resolution error < 0.1 °C - accuracy TC ± 20 µV - accuracy RTD: ± 100 mΩ |
| Display elements: | LED PWR (battery status), one green LED LED COM (communication status), one yellow LED LED FLT (fault signal), one red LED |
| Control elements: | 2 push buttons: - power On/Off - Join Trigger - Device Status Trigger - 2-wire RTD Wire Compensation - battery replacement confirmation |
| Configuration: | wired interface: - HART 7.1, FSK compatible - transmission rate: 1200 Bit/s - used for device commissioning with an handheld terminal or a configuration tool (DTM) |
| Parameter assignment: | - sampling period: 1, 2, 5, 10, 30 seconds or 1, 2, 5, 10, 30, 60 minutes - transmit power: configurable 0 dBm or 10 dBm (EIRP) - sensor type - mapping of input measuring values 1 and 2 into primary variable (PV) and secondary variable (SV) - publishing of up to three messages from the device, transmission rate selectable from 4 seconds to 60 minutes |
| Electromagnetic compatibility: Directive 2004/108/EC: | EN 61326-1:2006 |
| Radio and telecommunication terminal equipment: | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Electromagnetic compatibility: Directive 99/5/EC: | ETSI EN 300328: V1.7.1 (2006-10), ETSI EN 301489-17: V1.2.1 (2002-08), EN 60950:2001 |
| Electromagnetic compatibility: FCC CFR47 Part 15 B and C: | ANSI C63.4-2003 , FCC ID: SJC-M2140 |
| Degree of protection: | IEC 60529 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Accuracy: | IEC 61298-3 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
| Relative humidity: | 5 ... 95 %, noncondensing |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60 |
| Degree of protection: | IP65 |
| Mass: | approx. 1000 g |
| Dimensions: | 77 x 129 x 177 mm (3 x 5.08 x 6.97 inch) |
| Mounting: | panel or pole mounting |
| EU-type examination certificate: | IMQ 09 ATEX 008X |
| Electromagnetic compatibility: Marking: | II 2(1)G Ex ia [ia] IIC T4 |
| Directive conformity: Directive 94/9/EC: | EN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2007 |
| FM approval: | CoC 3042534 |
| IECEx approval: | IECEx INE 09.0025X |
| Directive conformity: Approved for: | Ex ia IIC T4 |
| Supplementary information: | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Designation: | battery W-BAT-B1-Li mandatory for use in connection with hazardous areas (order separately) mounting set W-ACC-F7MK External cold junction compensation W-ACC-CJC |
Logistic parameters
| ECCN: | |
| Country of Origin: | Deutschland |
| EAN: | 4050143061563 |
| Weight: | 0.74 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |