191610
KLD0-SAA
Voltage adjustment module
Pepperl+Fuchs Segment Protectors feature a safety switch off for explosion protection at typically 31.5 V. Series voltage reducing module, Removable terminals, Polarity reversal protected, Installation in cabinet on DIN mounting rail, For FOUNDATION Fieldbus H1 and PROFIBUS PApa. In rare cases the tolerances in other manufacturers’ power modules in combination with very short cable lengths with little or no voltage drop lead to a switch off of the Segment Protector. The KLD0-SAA is used to limit the voltage to uncritical values. The KLD0-SAA is installed in close proximity to the power supply within the control cabinet.
| Design / Mounting: | Cabinet installation |
| Field-side: Connection: | terminals 10+, 11-, 12S |
| Field-side: Rated voltage: | Uin - Uout 0.9 ... 1.8 V |
| Field-side: Rated current: | max. 1 A |
| Host-side: Connection: | terminals 7+, 8-, 9S |
| Host-side: Rated voltage: | 9 ... 32 V DC |
| Host-side: Rated current: | max. 1 A |
| Host-side: Power dissipation: | max. 1.8 W |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | < 75 % |
| Pollution degree: | max. 2, according to IEC 60664 |
| Connection type: | Terminals |
| Core cross-section: | up to 2.5 mm2 |
| Housing: | 20 mm x 115 mm x 107 mm |
| Degree of protection: | IP20 |
| Mass: | approx. 100 g |
| Mounting: | DIN rail mounting |
| Statement of conformity: | PF 16 CERT 1030 X |
| Electromagnetic compatibility: Group, category, type of protection: | II 3 G Ex ec IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-7:2015 |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |