Pepperl+Fuchs
096046
KFA6-ER-1.6
Pepperl+Fuchs 096046
KFA6-ER-1.6
Conductivity Switch Amplifier
Description
This signal conditioner provides the AC measuring voltage for the levelsensing electrodes. 1-channel signal conditioner, 230 V AC supply, Level sensing input, Adjustable range 5 kΩ .. 150 kΩ, Relay contact output, Minimum/maximum controlpa. Once the measured medium reaches the electrodes, the unit reacts by energizing a form C changeover relay contact. The module is voltage and temperature stabilized and guarantees defined switching characteristics. An electronic holding circuit is used that allows minimum/maximum control. Since the conductance of the media may vary, the relay response sensitivity is adjustable. The normal output state can be reversed through the mode of operation switch S1.
Technical parameters
| Signal type: | Digital Input |
| Connection: | terminals 11 (L1), 12 (N) |
| Rated voltage: | 207 ... 253 V AC, 45 ... 65 Hz |
| Power consumption: | approx. 0.8 W |
| Connection side: | field side |
| Connection: | terminals 1 (mass), 2 (min), 3 (max) |
| Open circuit voltage/short-circuit current: | approx. 10 V AC (approx. 1 Hz) / approx. 5 mA |
| Control input: | min./max. control system: terminals 1, 2, 3 on/off control system: terminals 1, 3 |
| Response sensitivity: | 5 ... 150 kΩ , adjustable via potentiometer (20 turns) |
| Connection side: | control side |
| Connection: | terminals 7, 8, 9 |
| Output: | 1 changeover contact |
| Contact loading: | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Energized/De-energized delay: | approx. 1 s / approx. 1 s |
| Input/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | LEDs |
| Control elements: | DIP-switch potentiometer |
| Configuration: | via DIP switches via potentiometer |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Insulation coordination: | EN 50178:1997 |
| Galvanic isolation: | EN 50178:1997 |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals , max. 2.5 mm2 |
| Mass: | approx. 110 g |
| Dimensions: | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Control elements: | switch S1 Position I open circuit current: In the open circuit current principle, the relay becomes active when the limit is reached. Position II closed circuit current: In closed circuit current principle, the relay is activated when power is applied. The relay is deactivated when the limit is reached. |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Optional accessories: | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-GY(-UPR-03) |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |