View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Di-soric
204806
MZEKS 25 PSL
Request a Quote
Image copyright: Di-soric
Di-soric 204806
MZEKS 25 PSL
Sensor for Gripper Systems
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Special magnet field for use on gripping tongs with T-shaped slot. Short design. All-electronically. Fully encapsulated electronic circuitry, vibration-resistant. High reproducibility. High protection class
Downloads
Technical parameters
| Cylinder groove: | T-groove, to be inserted from above in the slot |
| Mounting: | clamping block |
| Maximum rating: | 100 mA, not short-circuit-proof, polarity-safe |
| Service voltage: | 10 ... 35 V DC |
| No-load current: | < 12 mA |
| Switching output: | pnp, NO, short circuit protected |
| Contact rating: | 3 W max. (30 V, 100 mA) |
| Display: | LED: yellow - output signal |
| Voltage drop: | < 2,0 V |
| Switching frequency: | 1000 Hz |
| Reproducibility: | < 0,1 mm |
| Ambient temperature, operation: | -25 … +70 °C |
| Insulation voltage endurance: | 500 V |
| Protection class: | IP 68, (Device and cable), IP 67, (Connector) |
| Protection degree: | III, operation on protective low voltage |
| Casing material: | Die-cast zinc |
| Material: | PUR (Cable) |
| Connection: | Cable, 2,5 m, flying leads |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.04 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |