KL9380
KL9380 | Mains filter terminal for dimmers
The KL9380 feed and filter terminal protects downstream Bus Terminals from high-energy and high-frequency interference pulses from the 230 V AC mains supply. The Bus Terminal contains a capacitance for smoothing the mains voltage and is particularly suitable for the operation of dimmer circuits. The KL9380 provides a sufficiently high pulse current for fast switching, which is particularly useful for operating a dimmer in leading edge phase control mode and for switching operations involving loads with capacitive effect that are not mains-synchronous. Thus, interference pulses can be filtered out.
Nominal voltage: | arbitrary up to 230 V AC |
Current load: | ≤ 10 A |
Capacity: | approx. 1 µF |
Integrated fine-wire fuse: | – |
Diagnostics: | – |
Power LED: | – |
Defect LED: | – |
Reported to K-bus: | – |
PE contact: | yes |
Shield connection: | – |
Renewed infeed: | – |
Connection facility to additional power contact: | 2 |
K-bus, looped through: | yes |
Bit width in the process image: | 0 |
Electrical connection to DIN rail: | – |
Current consumption K-bus: | – |
Electrical isolation: | – |
Housing width: | 12 mm |
Weight: | approx. 50 g |
Side by side mounting on Bus Terminals with power contact: | yes |
Side by side mounting on Bus Terminals without power contact: | – |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Approvals/markings: | CE |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |