KL2631
KL2631 | 1-channel relay output terminal 400 V AC, 300 V DC
The KL2631 output terminal has a relay which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 400 V AC, and can be generally used for switching devices requiring mains power. The Bus Terminal indicates its signal state by means of a light emitting diode. In order to use the high voltage of up to 400 V AC, the KL2631 must be supplied via the KL9190 power feed terminal.
Number of outputs: | 1 x make contacts for power contact |
Nominal voltage: | 400 V AC/300 V DC |
Switching capacity DC: | 300 V = 0.15 A; 24 V = 5 A; non-linear |
Switching capacity AC: | 1500 VA |
Switching voltage minimum: | power contact |
Load type: | ohmic, inductive, lamp load |
Max. output current: | 2 A |
Switching current: | switching capacity DC: 300 V = 0.15 A; 24 V = 5 A; non-linear; switching capacity AC: 1500 VA |
Minimum permitted load: | no data |
Lamp test, electronic ballast: | no data |
Electrical isolation: | 500 V (K-bus/field potential) |
Current consumption power contacts: | only load |
Current consumption K-bus: | typ. 80 mA |
Bit width in the process image: | 2 outputs |
Operating cycles mech. (min.): | 1 x 107 |
Operating cycles electr. (min.): | 1.3 x 105 (2 A/250 V AC) |
Configuration: | no address or configuration setting |
Special features: | 400 V contact |
Weight: | approx. 85 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Pluggable wiring: | for all KSxxxx Bus Terminals |
Approvals: | CE, GL |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |