View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
8790500000
MCZ R 48...110VDC 1CO AU TRAK
Request a Quote
Image copyright: Weidmueller
Weidmueller 8790500000
MCZ R 48...110VDC 1CO AU TRAK
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Type: | MCZ R 48...110VDC 1CO AU TRAK |
| Order No.: | 8790500000 |
| Version: | MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO 5µm Au, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection |
| GTIN (EAN): | 4032248479511 |
| Qty.: | 10 pc(s). |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 91 mm |
| Height (inches): | 3.583 inch |
| Depth: | 63.2 mm |
| Depth (inches): | 2.488 inch |
| Net weight: | 28 g |
| Humidity: | 95 % for 30 days, minimal condensation to EN 50155 |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...70 °C |
| Note: room temperature (service): | +85 °C for 10 minutes |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 48...110 V DC + 25 % / - 30 % |
| Rated current DC: | < 3 mA |
| Power rating: | < 300 mW |
| Pull-in/drop-out voltage, typ.: | 25 V / 6 V DC |
| Status indicator: | Green LED |
| Protective circuit: | Free-wheeling diode, Varistor, Reverse polarity protection |
| Max. reset time after voltage interruption: | 10 ms |
| Rated switching voltage: | 250 V AC |
| Max. switching voltage, AC: | 250 V |
| Max. switching voltage, DC: | 250 V |
| Continuous current: | 6 A |
| Inrush current: | 6 A |
| AC switching capacity (resistive), max.: | 1500 VA |
| DC switching capacity (resistive), max.: | 120 W @ 24 V |
| Switch-on delay: | < 4 ms |
| Switch-off delay: | < 100 ms |
| Min. switching power: | 1 mA @ 1 V |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 1 CO contact (AgSnO 5µm Au) |
| Version: | for railway applications |
| Rail: | TS 35 |
| Test button: | No |
| Mechanical switch position indicator: | No |
| Open sides: | right |
| Colour: | beige |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 5.5 mm |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Standards: | DIN EN 50178, DIN EN 50155 |
| Wire connection method: | Tension-clamp connection |
| Stripping length, rated connection: | 8 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 16 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| UNSPSC: | 30-21-19-17 |
| ROHS: | Conform |
| Type: | MCZ R 48...110VDC 1CO AU TRAK |
| Order No.: | 8790500000 |
| Version: | MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO 5µm Au, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection |
| GTIN (EAN): | 4032248479511 |
| Qty.: | 10 pc(s). |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 91 mm |
| Height (inches): | 3.583 inch |
| Depth: | 63.2 mm |
| Depth (inches): | 2.488 inch |
| Net weight: | 28 g |
| Humidity: | 95 % for 30 days, minimal condensation to EN 50155 |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...70 °C |
| Note: room temperature (service): | +85 °C for 10 minutes |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 48...110 V DC + 25 % / - 30 % |
| Rated current DC: | < 3 mA |
| Power rating: | < 300 mW |
| Pull-in/drop-out voltage, typ.: | 25 V / 6 V DC |
| Status indicator: | Green LED |
| Protective circuit: | Free-wheeling diode, Varistor, Reverse polarity protection |
| Max. reset time after voltage interruption: | 10 ms |
| Rated switching voltage: | 250 V AC |
| Max. switching voltage, AC: | 250 V |
| Max. switching voltage, DC: | 250 V |
| Continuous current: | 6 A |
| Inrush current: | 6 A |
| AC switching capacity (resistive), max.: | 1500 VA |
| DC switching capacity (resistive), max.: | 120 W @ 24 V |
| Switch-on delay: | < 4 ms |
| Switch-off delay: | < 100 ms |
| Min. switching power: | 1 mA @ 1 V |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 1 CO contact (AgSnO 5µm Au) |
| Version: | for railway applications |
| Rail: | TS 35 |
| Test button: | No |
| Mechanical switch position indicator: | No |
| Open sides: | right |
| Colour: | beige |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 5.5 mm |
| Impulse withstand voltage: | 4 kV (1.2/50 µs) |
| Standards: | DIN EN 50178, DIN EN 50155 |
| Wire connection method: | Tension-clamp connection |
| Stripping length, rated connection: | 8 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 1.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 16 |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 1.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Blade size: | 0.6 x 3.5 mm |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| UNSPSC: | 30-21-19-17 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.028 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |