8721170000
MAS RPSH
| Type: | MAS RPSH |
| Order No.: | 8721170000 |
| Version: | MICROSERIES, Supply isolator |
| GTIN (EAN): | 4032248394425 |
| Qty.: | 1 pc(s). |
| Length: | 88 mm |
| Length (inches): | 3.465 inch |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 97.8 mm |
| Height (inches): | 3.85 inch |
| Net weight: | 48 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -25 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -25 °C...85 °C |
| MTTF: | 450 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Certificate No. (cURus): | E175400 |
| Number of inputs: | 1 |
| Sensor: | 2-wire |
| Sensor supply: | 16.5 V / constant for 3 – 22 mA |
| Input current: | 4...20 mA |
| Number of outputs: | 1 |
| Output signal limit: | 22...25 mA or 11...12.5 V |
| Output voltage, note: | 0...10 V |
| Output current: | 0...20 mA, 4...20 mA |
| load impedance voltage: | ≥ 10 kΩ |
| Load impedance current: | ≤ 500 Ω |
| Offset voltage: | < 30 mV |
| Offset current: | < 30 µA |
| Configuration: | DIP switch |
| Current-carrying capacity of cross-connect.: | ≤ 20 A |
| Galvanic isolation: | 3-way isolator |
| Input/Output: | 4...20 mA / 0(4)...20 mA, 0...10V |
| Power consumption: | ca. 1 W |
| Rail: | TS 35 |
| Step response time: | ≤ 2 ms |
| Temperature coefficient: | ≤ 50 ppm/K |
| Voltage supply: | 24 V DC ± 15 % |
| EMC standards: | DIN EN 61326 Class B |
| Galvanic isolation: | 3-way isolator |
| Pollution severity: | 2 |
| Rated voltage: | 600 V |
| Surge voltage category: | II |
| Type of connection: | Screw connection |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| UNSPSC: | 31-12-10-07 |
| ROHS: | Conform |
| Type: | MAS RPSH |
| Order No.: | 8721170000 |
| Version: | MICROSERIES, Supply isolator |
| GTIN (EAN): | 4032248394425 |
| Qty.: | 1 pc(s). |
| Length: | 88 mm |
| Length (inches): | 3.465 inch |
| Width: | 6.1 mm |
| Width (inches): | 0.24 inch |
| Height: | 97.8 mm |
| Height (inches): | 3.85 inch |
| Net weight: | 48 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -25 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -25 °C...85 °C |
| MTTF: | 450 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Certificate No. (cURus): | E175400 |
| Number of inputs: | 1 |
| Sensor: | 2-wire |
| Sensor supply: | 16.5 V / constant for 3 – 22 mA |
| Input current: | 4...20 mA |
| Number of outputs: | 1 |
| Output signal limit: | 22...25 mA or 11...12.5 V |
| Output voltage, note: | 0...10 V |
| Output current: | 0...20 mA, 4...20 mA |
| load impedance voltage: | ≥ 10 kΩ |
| Load impedance current: | ≤ 500 Ω |
| Offset voltage: | < 30 mV |
| Offset current: | < 30 µA |
| Configuration: | DIP switch |
| Current-carrying capacity of cross-connect.: | ≤ 20 A |
| Galvanic isolation: | 3-way isolator |
| Input/Output: | 4...20 mA / 0(4)...20 mA, 0...10V |
| Power consumption: | ca. 1 W |
| Rail: | TS 35 |
| Step response time: | ≤ 2 ms |
| Temperature coefficient: | ≤ 50 ppm/K |
| Voltage supply: | 24 V DC ± 15 % |
| EMC standards: | DIN EN 61326 Class B |
| Galvanic isolation: | 3-way isolator |
| Pollution severity: | 2 |
| Rated voltage: | 600 V |
| Surge voltage category: | II |
| Type of connection: | Screw connection |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| UNSPSC: | 31-12-10-07 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.048 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |