8615690000
WDS2 RS232/TTY
| Type: | WDS2 RS232/TTY |
| Order No.: | 8615690000 |
| Version: | Interface converter, RS232, TTY |
| GTIN (EAN): | 4032248277681 |
| Qty.: | 1 pc(s). |
| Length: | 92.4 mm |
| Length (inches): | 3.638 inch |
| Width: | 22.5 mm |
| Width (inches): | 0.886 inch |
| Height: | 112.4 mm |
| Height (inches): | 4.425 inch |
| Net weight: | 149 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -20 °C...85 °C |
| MTTF: | 419 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Interface: | 1x serial RS-232 / TTA |
| Communication: | Bi-directional |
| Type: | RS232, TTY |
| Assignment: | DTE/DCE switchable with DIP switch |
| Connection type: | SUB-D9 (male plug) |
| Bit delay: | ≤ 3 µs |
| Bit distortion: | < 1.5% |
| Load: | ≤ 500 Ω |
| Shield connection: | KLBÜ 4-6/Z1 |
| Status indicator: | LED green: supply voltage, TxD, RxD |
| Transmission channels: | Full-duplex |
| Transmission distance: | Max. 1000 m twisted pair |
| Transmission rate: | 19.2 kBit/s |
| Status indicator: | LED green: supply voltage, TxD, RxD |
| Configuration: | DIP switch |
| Current-carrying capacity of cross-connect.: | ≤ 2 A |
| Galvanic isolation: | 3-way isolator |
| Power consumption: | ca. 0.8 W |
| Rail: | TS 35 |
| Voltage supply: | 24 V DC ± 20 % |
| EMC standards: | EN 55011, EN 61000-6-2, EN 61000-6-4 |
| Galvanic isolation: | 3-way isolator |
| Impulse withstand voltage: | 4 kV |
| Insulation voltage: | 2 kV DC / 1 min. |
| Insulation voltage input or output/supply: | 2 kV DC / 1 min. |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 7 mm |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC000310 |
| ETIM 7.0: | EC000310 |
| eClass 9.0: | 19-17-92-90 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 19-17-92-90 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
| Type: | WDS2 RS232/TTY |
| Order No.: | 8615690000 |
| Version: | Interface converter, RS232, TTY |
| GTIN (EAN): | 4032248277681 |
| Qty.: | 1 pc(s). |
| Length: | 92.4 mm |
| Length (inches): | 3.638 inch |
| Width: | 22.5 mm |
| Width (inches): | 0.886 inch |
| Height: | 112.4 mm |
| Height (inches): | 4.425 inch |
| Net weight: | 149 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -20 °C...85 °C |
| MTTF: | 419 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Interface: | 1x serial RS-232 / TTA |
| Communication: | Bi-directional |
| Type: | RS232, TTY |
| Assignment: | DTE/DCE switchable with DIP switch |
| Connection type: | SUB-D9 (male plug) |
| Bit delay: | ≤ 3 µs |
| Bit distortion: | < 1.5% |
| Load: | ≤ 500 Ω |
| Shield connection: | KLBÜ 4-6/Z1 |
| Status indicator: | LED green: supply voltage, TxD, RxD |
| Transmission channels: | Full-duplex |
| Transmission distance: | Max. 1000 m twisted pair |
| Transmission rate: | 19.2 kBit/s |
| Status indicator: | LED green: supply voltage, TxD, RxD |
| Configuration: | DIP switch |
| Current-carrying capacity of cross-connect.: | ≤ 2 A |
| Galvanic isolation: | 3-way isolator |
| Power consumption: | ca. 0.8 W |
| Rail: | TS 35 |
| Voltage supply: | 24 V DC ± 20 % |
| EMC standards: | EN 55011, EN 61000-6-2, EN 61000-6-4 |
| Galvanic isolation: | 3-way isolator |
| Impulse withstand voltage: | 4 kV |
| Insulation voltage: | 2 kV DC / 1 min. |
| Insulation voltage input or output/supply: | 2 kV DC / 1 min. |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 7 mm |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC000310 |
| ETIM 7.0: | EC000310 |
| eClass 9.0: | 19-17-92-90 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 19-17-92-90 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.149 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |