View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
8560710000
WAZ5 PRO RTD
Request a Quote
Image copyright: Weidmueller
Weidmueller 8560710000
WAZ5 PRO RTD
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2020-12-31 |
| Type: | WAZ5 PRO RTD |
| Order No.: | 8560710000 |
| Version: | RTD isolating transformer, Tension-clamp connection |
| GTIN (EAN): | 4032248207329 |
| Qty.: | 1 pc(s). |
| Length: | 92.4 mm |
| Length (inches): | 3.638 inch |
| Width: | 17.5 mm |
| Width (inches): | 0.689 inch |
| Depth: | 112.4 mm |
| Depth (inches): | 4.425 inch |
| Weight: | 100 g |
| Net weight: | 140 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -20 °C...85 °C |
| MTTF: | 270 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100/2-/3-/4-wire, Ni100/2-/3-/4-wire, potentiometer: min. 0–100 Ω, max. 0–100 kΩ, resistance: 0–450 Ω |
| Line resistance in measuring circuit: | 50 Ω for 3- and 4-conductor |
| Temperature input range: | Configurable, PT100: -200°C…850 °C, NI100: -60°C…+250 °C |
| Number of outputs: | 1 |
| Output voltage, note: | 0...10 V |
| Output current: | 0...20 mA, 4...20 mA |
| Wire break detection: | LED flashing (output value: > 20 mA, >10 V) |
| Fine adjustment: | ≥ ± 5 %, Version 1 and later: ≥ 12.5 % / potentiometer: 12.5%...25% |
| load impedance voltage: | ≥ 1 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Offset voltage: | max. 0.05 V |
| Offset current: | max. 100 µA |
| Status indicator: | Module active: LED on/ wire breakage: LED flashing/Error: LED off |
| Accuracy: | < 0.3 % of measured value |
| Configuration: | DIP switch, Potentiometer |
| Current-carrying capacity of cross-connect.: | ≤ 2 A |
| Galvanic isolation: | 3-way isolator |
| Input/Output: | configurable |
| Linearity: | Yes |
| Rail: | TS 35 |
| Step response time: | fast/slow: 2-/3-/4-conductor: 1.2 s/2.2 s; potentiometer: 0.5 s/1.1 s |
| Voltage supply: | 24 V DC ± 20 % |
| Clearance & creepage distances: | ≥ 3 mm |
| EMC standards: | EN 55011, EN 61000-6 |
| Galvanic isolation: | 3-way isolator |
| Impulse withstand voltage: | 4 kV |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Type of connection: | Tension-clamp connection |
| Stripping length, rated connection: | 7 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2020-12-31 |
| Type: | WAZ5 PRO RTD |
| Order No.: | 8560710000 |
| Version: | RTD isolating transformer, Tension-clamp connection |
| GTIN (EAN): | 4032248207329 |
| Qty.: | 1 pc(s). |
| Length: | 92.4 mm |
| Length (inches): | 3.638 inch |
| Width: | 17.5 mm |
| Width (inches): | 0.689 inch |
| Depth: | 112.4 mm |
| Depth (inches): | 4.425 inch |
| Weight: | 100 g |
| Net weight: | 140 g |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -20 °C |
| Operating temperature: | 0 °C...55 °C |
| Storage temperature: | -20 °C...85 °C |
| MTTF: | 270 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100/2-/3-/4-wire, Ni100/2-/3-/4-wire, potentiometer: min. 0–100 Ω, max. 0–100 kΩ, resistance: 0–450 Ω |
| Line resistance in measuring circuit: | 50 Ω for 3- and 4-conductor |
| Temperature input range: | Configurable, PT100: -200°C…850 °C, NI100: -60°C…+250 °C |
| Number of outputs: | 1 |
| Output voltage, note: | 0...10 V |
| Output current: | 0...20 mA, 4...20 mA |
| Wire break detection: | LED flashing (output value: > 20 mA, >10 V) |
| Fine adjustment: | ≥ ± 5 %, Version 1 and later: ≥ 12.5 % / potentiometer: 12.5%...25% |
| load impedance voltage: | ≥ 1 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Offset voltage: | max. 0.05 V |
| Offset current: | max. 100 µA |
| Status indicator: | Module active: LED on/ wire breakage: LED flashing/Error: LED off |
| Accuracy: | < 0.3 % of measured value |
| Configuration: | DIP switch, Potentiometer |
| Current-carrying capacity of cross-connect.: | ≤ 2 A |
| Galvanic isolation: | 3-way isolator |
| Input/Output: | configurable |
| Linearity: | Yes |
| Rail: | TS 35 |
| Step response time: | fast/slow: 2-/3-/4-conductor: 1.2 s/2.2 s; potentiometer: 0.5 s/1.1 s |
| Voltage supply: | 24 V DC ± 20 % |
| Clearance & creepage distances: | ≥ 3 mm |
| EMC standards: | EN 55011, EN 61000-6 |
| Galvanic isolation: | 3-way isolator |
| Impulse withstand voltage: | 4 kV |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Type of connection: | Tension-clamp connection |
| Stripping length, rated connection: | 7 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| UNSPSC: | 30-21-18-01 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.14 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |