7760054307
EPAK-CI-2CO
| Type: | EPAK-CI-2CO |
| Order No.: | 7760054307 |
| GTIN (EAN): | 6944169747731 |
| Qty.: | 1 pc(s). |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Input signal: | Current source (active) or current sink (passive, 2-wire sensor) |
| Input current: | 0...20 mA, 4...20 mA |
| Input resistance, current: | ≤ 100 Ω |
| Number of outputs: | 2 |
| Output current: | 0...20 mA, 4...20 mA |
| Load impedance current: | ≤ 300 Ω |
| Accuracy: | 0.1% FSR |
| Configuration: | none |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Power consumption: | ≤ 60mA, 24V supply @ 20mA output, at current source (active sensor), ≤ 80mA, 24V supply @ 20mA output, with 2-wire sensor |
| Step response time: | ≤ 500 ms |
| Temperature coefficient: | ≤ 300 ppm/K |
| Voltage supply: | 20...35 V DC |
| EMC standards: | IEC 61326-1 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 3 kV (1.2⁄50µs) |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | II |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| Type: | EPAK-CI-2CO |
| Order No.: | 7760054307 |
| GTIN (EAN): | 6944169747731 |
| Qty.: | 1 pc(s). |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Input signal: | Current source (active) or current sink (passive, 2-wire sensor) |
| Input current: | 0...20 mA, 4...20 mA |
| Input resistance, current: | ≤ 100 Ω |
| Number of outputs: | 2 |
| Output current: | 0...20 mA, 4...20 mA |
| Load impedance current: | ≤ 300 Ω |
| Accuracy: | 0.1% FSR |
| Configuration: | none |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Power consumption: | ≤ 60mA, 24V supply @ 20mA output, at current source (active sensor), ≤ 80mA, 24V supply @ 20mA output, with 2-wire sensor |
| Step response time: | ≤ 500 ms |
| Temperature coefficient: | ≤ 300 ppm/K |
| Voltage supply: | 20...35 V DC |
| EMC standards: | IEC 61326-1 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 3 kV (1.2⁄50µs) |
| Pollution severity: | 2 |
| Rated voltage: | 300 V |
| Surge voltage category: | II |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-90 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.114 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |