7760054242
EPAK-RTI-CO-S
| Type: | EPAK-RTI-CO-S |
| Order No.: | 7760054242 |
| GTIN (EAN): | 6944169716409 |
| Qty.: | 1 pc(s). |
| Length: | 100 mm |
| Length (inches): | 3.937 inch |
| Width: | 17.5 |
| Width (inches): | 0.689 inch |
| Depth: | 89 mm |
| Depth (inches): | 3.504 inch |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100/2-/3-wire |
| Temperature input range: | PT1000: -200°C…850 °C |
| Number of outputs: | 1 |
| Output current: | 0(4)...20 mA |
| Load impedance current: | ≤ 500 Ω |
| Accuracy: | < 0.2% of output range |
| Configuration: | Default settings |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Power consumption: | <60mA @ 24VDC |
| Step response time: | 1 s @ temp |
| Temperature coefficient: | ≤ 300 ppm/K |
| Voltage supply: | 24 V DC ± 20 % |
| EMC standards: | EN 61326 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 3 kV (1.2⁄50µs) |
| Insulation voltage: | 1 kV input / output / power supply |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
| Type: | EPAK-RTI-CO-S |
| Order No.: | 7760054242 |
| GTIN (EAN): | 6944169716409 |
| Qty.: | 1 pc(s). |
| Length: | 100 mm |
| Length (inches): | 3.937 inch |
| Width: | 17.5 |
| Width (inches): | 0.689 inch |
| Depth: | 89 mm |
| Depth (inches): | 3.504 inch |
| Net weight: | 80 g |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | -20 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -20 °C...60 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100/2-/3-wire |
| Temperature input range: | PT1000: -200°C…850 °C |
| Number of outputs: | 1 |
| Output current: | 0(4)...20 mA |
| Load impedance current: | ≤ 500 Ω |
| Accuracy: | < 0.2% of output range |
| Configuration: | Default settings |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Power consumption: | <60mA @ 24VDC |
| Step response time: | 1 s @ temp |
| Temperature coefficient: | ≤ 300 ppm/K |
| Voltage supply: | 24 V DC ± 20 % |
| EMC standards: | EN 61326 |
| Galvanic isolation: | between input ⁄ output ⁄ supply |
| Impulse withstand voltage: | 3 kV (1.2⁄50µs) |
| Insulation voltage: | 1 kV input / output / power supply |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.107 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |