1479980000
TRZ 24-230VUC 1NO HCP
| Type: | TRZ 24-230VUC 1NO HCP |
| Order No.: | 1479980000 |
| Version: | TERMSERIES, Relay module, Number of contacts: 1, NO contact AgSnO2 + W, Rated control voltage: 24…230 V UC ±10 %, Continuous current: 16 A, Tension-clamp connection |
| GTIN (EAN): | 4050118288421 |
| Qty.: | 10 pc(s). |
| Width: | 12.8 mm |
| Width (inches): | 0.504 inch |
| Height: | 90.5 mm |
| Height (inches): | 3.563 inch |
| Depth: | 87.8 mm |
| Depth (inches): | 3.457 inch |
| Net weight: | 60 g |
| Operating temperature, max.: | 40 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...40 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Ambient temperature (operational), max.: | 40 °C |
| Connection cross-section AWG, min.: | AWG 26 |
| Connection cross-section AWG, max.: | AWG 14 |
| Type of conductor: | rigid copper conductor, flexible copper conductor |
| Pollution severity level: | 2 |
| Altitude: | ≤ 2000 m, above sea level |
| Rated control voltage: | 24...230 V UC ± 10 % |
| Rated current AC: | 30.0 mA AC @ 24 V AC, 7.2 mA AC @ 230 V AC |
| Rated current DC: | 40.5 mA DC @ 24 V DC, 3.4 mA DC @ 230 V DC |
| Power rating: | 980 mW @ 24 V DC, 650 mVA @ 24 V AC, 780 mW @ 230 V DC, 1.68 VA @ 230 V AC |
| Status indicator: | Green LED |
| Protective circuit: | Rectifier |
| Coil voltage of the replacement relay deviating from the rated control voltage: | Yes |
| Coil voltage of the replacement relay: | 24 V DC |
| Rated switching voltage: | 250 V AC |
| Max. switching voltage, AC: | 250 V |
| Max. switching voltage, DC: | 250 V |
| Continuous current: | 16 A |
| Inrush current: | 165 A / 20 ms, 800 A / 200 µs |
| AC switching capacity (resistive), max.: | 4000 VA |
| DC switching capacity (resistive), max.: | 384 W @ 24 V |
| Switch-on delay: | ≤ 30 ms |
| Switch-off delay: | < 75 ms |
| Min. switching power: | 1 W |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 1 NO contact (AgSnO2 + W) |
| Rail: | TS 35 |
| Test button: | No |
| Mechanical switch position indicator: | No |
| Colour: | black |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 5.5 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Standards: | EN 50178, EN 55011, EN 61000-6-1, 2, 4 |
| Certificate No. (DNVGL): | TAA00001E5 |
| Certificate no. (cULus): | E141197 |
| Wire connection method: | Tension-clamp connection |
| Stripping length, rated connection: | 8 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.14 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Wire cross-section, solid, min.: | 0.14 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.14 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.14 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.14 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Twin wire-end ferrules, min.: | 0.5 mm² |
| Twin wire-end ferrules, max.: | 1 mm² |
| Blade size: | 0.6 x 3.5 mm |
| Gauge to IEC 60947-1: | A1, B1 |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| ROHS: | Conform |
| Type: | TRZ 24-230VUC 1NO HCP |
| Order No.: | 1479980000 |
| Version: | TERMSERIES, Relay module, Number of contacts: 1, NO contact AgSnO2 + W, Rated control voltage: 24…230 V UC ±10 %, Continuous current: 16 A, Tension-clamp connection |
| GTIN (EAN): | 4050118288421 |
| Qty.: | 10 pc(s). |
| Width: | 12.8 mm |
| Width (inches): | 0.504 inch |
| Height: | 90.5 mm |
| Height (inches): | 3.563 inch |
| Depth: | 87.8 mm |
| Depth (inches): | 3.457 inch |
| Net weight: | 60 g |
| Operating temperature, max.: | 40 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...40 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Ambient temperature (operational), max.: | 40 °C |
| Connection cross-section AWG, min.: | AWG 26 |
| Connection cross-section AWG, max.: | AWG 14 |
| Type of conductor: | rigid copper conductor, flexible copper conductor |
| Pollution severity level: | 2 |
| Altitude: | ≤ 2000 m, above sea level |
| Rated control voltage: | 24...230 V UC ± 10 % |
| Rated current AC: | 30.0 mA AC @ 24 V AC, 7.2 mA AC @ 230 V AC |
| Rated current DC: | 40.5 mA DC @ 24 V DC, 3.4 mA DC @ 230 V DC |
| Power rating: | 980 mW @ 24 V DC, 650 mVA @ 24 V AC, 780 mW @ 230 V DC, 1.68 VA @ 230 V AC |
| Status indicator: | Green LED |
| Protective circuit: | Rectifier |
| Coil voltage of the replacement relay deviating from the rated control voltage: | Yes |
| Coil voltage of the replacement relay: | 24 V DC |
| Rated switching voltage: | 250 V AC |
| Max. switching voltage, AC: | 250 V |
| Max. switching voltage, DC: | 250 V |
| Continuous current: | 16 A |
| Inrush current: | 165 A / 20 ms, 800 A / 200 µs |
| AC switching capacity (resistive), max.: | 4000 VA |
| DC switching capacity (resistive), max.: | 384 W @ 24 V |
| Switch-on delay: | ≤ 30 ms |
| Switch-off delay: | < 75 ms |
| Min. switching power: | 1 W |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 1 NO contact (AgSnO2 + W) |
| Rail: | TS 35 |
| Test button: | No |
| Mechanical switch position indicator: | No |
| Colour: | black |
| UL 94 flammability rating: | V-0 |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 5.5 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Standards: | EN 50178, EN 55011, EN 61000-6-1, 2, 4 |
| Certificate No. (DNVGL): | TAA00001E5 |
| Certificate no. (cULus): | E141197 |
| Wire connection method: | Tension-clamp connection |
| Stripping length, rated connection: | 8 mm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.14 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Wire cross-section, solid, min.: | 0.14 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.14 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Wire cross-section, finely stranded, min. (AWG): | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG): | AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.14 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.14 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1.5 mm² |
| Twin wire-end ferrules, min.: | 0.5 mm² |
| Twin wire-end ferrules, max.: | 1 mm² |
| Blade size: | 0.6 x 3.5 mm |
| Gauge to IEC 60947-1: | A1, B1 |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| ROHS: | Conform |
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.062 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |