View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
1477930000
KSPMH M50 SSC
Request a Quote
Image copyright: Weidmueller
Weidmueller 1477930000
KSPMH M50 SSC
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Type: | KSPMH M50 SSC |
| Order No.: | 1477930000 |
| Version: | KSPMH (Klippon blanking plug, type MH), Blanking plug, M 50, 16 mm, Stainless steel 1.4404 (316L) |
| GTIN (EAN): | 4050118285857 |
| Qty.: | 1 pc(s). |
| Length: | 21.5 mm |
| Length (inches): | 0.846 inch |
| Net weight: | 489 g |
| Certificate no. cable gland (ATEX): | SIRA 09ATEX1320X |
| Certificate no. cable gland (EAC): | TR RU C-GB.ΓБ06.B.00098 |
| Certificate no. cable gland (IECEx): | IECEx SIR 09.0131X |
| Material: | Stainless steel 1.4404 (316L) |
| External thread: | M 50 |
| Length of thread: | 16 mm |
| Impact resistance: | 7 J ATEX version |
| Protection degree: | IP66, IP68 (100 m / 168 h) |
| Water depth: | 100 m |
| Operating temperature range, min.: | -60 °C |
| Operating temperature range, max.: | 200 °C |
| Head diameter: | 55.5 mm |
| O-Ring: | Silicone |
| Tightening torque: | 10 Nm |
| Standards: | EN 60079-31, EN 60079-0, EN 60079-1, EN 60079-7 |
| Note: protection class: | • All metric sealing plugs have a thread pitch of 1.5 mm. • In Ex nR applications, the KSPMH must be fitted with a further seal. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • On installation of the KSPMH, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the inner thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • If KSPMH sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit. |
| ETIM 6.0: | EC000451 |
| ETIM 7.0: | EC000451 |
| eClass 9.0: | 27-14-44-25 |
| eClass 9.1: | 27-14-44-35 |
| eClass 10.0: | 27-14-44-25 |
| ROHS: | Conform |
| Type: | KSPMH M50 SSC |
| Order No.: | 1477930000 |
| Version: | KSPMH (Klippon blanking plug, type MH), Blanking plug, M 50, 16 mm, Stainless steel 1.4404 (316L) |
| GTIN (EAN): | 4050118285857 |
| Qty.: | 1 pc(s). |
| Length: | 21.5 mm |
| Length (inches): | 0.846 inch |
| Net weight: | 489 g |
| Certificate no. cable gland (ATEX): | SIRA 09ATEX1320X |
| Certificate no. cable gland (EAC): | TR RU C-GB.ΓБ06.B.00098 |
| Certificate no. cable gland (IECEx): | IECEx SIR 09.0131X |
| Material: | Stainless steel 1.4404 (316L) |
| External thread: | M 50 |
| Length of thread: | 16 mm |
| Impact resistance: | 7 J ATEX version |
| Protection degree: | IP66, IP68 (100 m / 168 h) |
| Water depth: | 100 m |
| Operating temperature range, min.: | -60 °C |
| Operating temperature range, max.: | 200 °C |
| Head diameter: | 55.5 mm |
| O-Ring: | Silicone |
| Tightening torque: | 10 Nm |
| Standards: | EN 60079-31, EN 60079-0, EN 60079-1, EN 60079-7 |
| Note: protection class: | • All metric sealing plugs have a thread pitch of 1.5 mm. • In Ex nR applications, the KSPMH must be fitted with a further seal. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • On installation of the KSPMH, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the inner thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • If KSPMH sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit. |
| ETIM 6.0: | EC000451 |
| ETIM 7.0: | EC000451 |
| eClass 9.0: | 27-14-44-25 |
| eClass 9.1: | 27-14-44-35 |
| eClass 10.0: | 27-14-44-25 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.489 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |