View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
1393050000
VPU III 3/280V
Request a Quote
Image copyright: Weidmueller
Weidmueller 1393050000
VPU III 3/280V
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Type: | VPU III 3/280V |
| Order No.: | 1393050000 |
| GTIN (EAN): | 4050118193862 |
| Qty.: | 1 pc(s). |
| Width: | 70 mm |
| Width (inches): | 2.756 inch |
| Height: | 90 mm |
| Height (inches): | 3.543 inch |
| Depth: | 57 mm |
| Depth (inches): | 2.244 inch |
| Net weight: | 191 g |
| Humidity: | 5 - 95% rel. humidity |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 70 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...70 °C |
| Rated current IN: | 16 A |
| Connection type: | Screw connection |
| Max. torque: | 0.22 Nm |
| Stripping length: | 5 mm |
| Cross-section for connected wire, solid core, min.: | 0.2 mm² |
| Cross-section for connected wire, solid core, max.: | 1.5 mm² |
| Colour: | grey |
| Design: | Installation housing; 1TE, Insta IP 20 |
| Optical function display: | Green LED = OK, Red LED = arrester is defective, replace |
| Protection degree: | IP20 |
| Rail: | TS 35 |
| Segment: | Power distribution |
| UL 94 flammability rating: | V-0 |
| Version: | with remote contact |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Rated voltage (AC): | 230 V |
| Voltage type: | 3-phase 230/400 V |
| Max. continuous voltage, Uc (AC): | 275 V |
| Low voltage network: | TN-C, TN-S, TN-C-S |
| Discharge current Imax (8/20µs) wire-PE: | 3 kA |
| Fuse: | 16 A |
| Short-circuit current rating ISCCR: | 1.5 kA |
| Protection level UP (typ.): | < 1000 V |
| Protection level Up at IN (L/N-PE): | ≤ 1.8 kV |
| Leakage current at Un: | 30 µA |
| Temporary surge voltage (over-voltage) - TOV: | 440 V |
| Combined pulse UOC: | 6 kV |
| Mains frequency at 250 Vmax: | 50...60Hz |
| Number of poles: | 1 |
| PE conductor current IPE: | 30 µA |
| Rated current IN: | 16 A |
| Requirements category acc. to IEC 61643-11: | Type III |
| Requirements class, acc. to EN 61643-11: | T3 |
| Response time: | ≤ 100 ns |
| Signalling contact: | 250 V 10 A 1 NC |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 7 mm |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
| Connection cross-section, stranded, min.: | 0.5 mm² |
| Connection cross-section, stranded, max.: | 2.5 mm² |
| Long specification: | Three-pin surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrester serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrester is installed in a standard installation/distributor housing in the vicinity of the equipment that needs protection. The VPU III 3 280 V is earthed between the outer conductors (L1, L2, L3 and the neutral conductor). With thermal separation device on the varistor. If there is no longer any protection, the colour of the LEDs changes from green to red. The functional state is also displayed by a voltage-free signalling contact (NC contact). Rated voltage: 230 V AC In/max (8/20 µs):3 kA protection level < 1.8 kV load current Il: 16A telecommunication output: contact NC: 250 V/0.5 A 48 V DC/0.1 A Type: Weidmüller VPU III 3 280 V Order No. 1393050000 or equivalent |
| Short specification: | Class III arrester with Uoc: 6 kV suitable for 230/400 V TN-S mains systems. Protection level < 1.8 kV. With remote alert Type: Weidmüller VPU III 3 280 V Order no. 1393050000 or equivalent |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
| Type: | VPU III 3/280V |
| Order No.: | 1393050000 |
| GTIN (EAN): | 4050118193862 |
| Qty.: | 1 pc(s). |
| Width: | 70 mm |
| Width (inches): | 2.756 inch |
| Height: | 90 mm |
| Height (inches): | 3.543 inch |
| Depth: | 57 mm |
| Depth (inches): | 2.244 inch |
| Net weight: | 191 g |
| Humidity: | 5 - 95% rel. humidity |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 70 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...70 °C |
| Rated current IN: | 16 A |
| Connection type: | Screw connection |
| Max. torque: | 0.22 Nm |
| Stripping length: | 5 mm |
| Cross-section for connected wire, solid core, min.: | 0.2 mm² |
| Cross-section for connected wire, solid core, max.: | 1.5 mm² |
| Colour: | grey |
| Design: | Installation housing; 1TE, Insta IP 20 |
| Optical function display: | Green LED = OK, Red LED = arrester is defective, replace |
| Protection degree: | IP20 |
| Rail: | TS 35 |
| Segment: | Power distribution |
| UL 94 flammability rating: | V-0 |
| Version: | with remote contact |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Rated voltage (AC): | 230 V |
| Voltage type: | 3-phase 230/400 V |
| Max. continuous voltage, Uc (AC): | 275 V |
| Low voltage network: | TN-C, TN-S, TN-C-S |
| Discharge current Imax (8/20µs) wire-PE: | 3 kA |
| Fuse: | 16 A |
| Short-circuit current rating ISCCR: | 1.5 kA |
| Protection level UP (typ.): | < 1000 V |
| Protection level Up at IN (L/N-PE): | ≤ 1.8 kV |
| Leakage current at Un: | 30 µA |
| Temporary surge voltage (over-voltage) - TOV: | 440 V |
| Combined pulse UOC: | 6 kV |
| Mains frequency at 250 Vmax: | 50...60Hz |
| Number of poles: | 1 |
| PE conductor current IPE: | 30 µA |
| Rated current IN: | 16 A |
| Requirements category acc. to IEC 61643-11: | Type III |
| Requirements class, acc. to EN 61643-11: | T3 |
| Response time: | ≤ 100 ns |
| Signalling contact: | 250 V 10 A 1 NC |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 7 mm |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.5 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire cross-section, solid, min.: | 0.5 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
| Connection cross-section, stranded, min.: | 0.5 mm² |
| Connection cross-section, stranded, max.: | 2.5 mm² |
| Long specification: | Three-pin surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrester serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrester is installed in a standard installation/distributor housing in the vicinity of the equipment that needs protection. The VPU III 3 280 V is earthed between the outer conductors (L1, L2, L3 and the neutral conductor). With thermal separation device on the varistor. If there is no longer any protection, the colour of the LEDs changes from green to red. The functional state is also displayed by a voltage-free signalling contact (NC contact). Rated voltage: 230 V AC In/max (8/20 µs):3 kA protection level < 1.8 kV load current Il: 16A telecommunication output: contact NC: 250 V/0.5 A 48 V DC/0.1 A Type: Weidmüller VPU III 3 280 V Order No. 1393050000 or equivalent |
| Short specification: | Class III arrester with Uoc: 6 kV suitable for 230/400 V TN-S mains systems. Protection level < 1.8 kV. With remote alert Type: Weidmüller VPU III 3 280 V Order no. 1393050000 or equivalent |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.191 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |