View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
1375510000
ACT20M-RTI-AO-S
Request a Quote
Image copyright: Weidmueller
Weidmueller 1375510000
ACT20M-RTI-AO-S
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Type: | ACT20M-RTI-AO-S |
| Order No.: | 1375510000 |
| Version: | Temperature converter, 2-/3-/4- wire RTD, With galvanic isolation, Input : Temperature, Output : I / U |
| GTIN (EAN): | 4050118259667 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 89 g |
| Humidity: | 95 %, no condensation |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| MTBF: | 152 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100 / 2-/3-/4-wire |
| Influence of the sensor cable resistance: | < 0.002 Ω⁄Ω (@ 3⁄4-wire) |
| Input measurement range: | PT100 -200…+850 °C |
| Line resistance in measuring circuit: | ≤ 50 Ω |
| Temperature input range: | Configurable, min. measurement range 10°C (RTD) |
| Number of outputs: | 1 |
| Output signal limit: | < 4 mA (average), < 60 mA (pulse current), low duty cycle |
| Output voltage, note: | configurable, 0(2)...10 V, 0(1)...5 V |
| Output current: | configurable, 0...20 mA, 4...20 mA |
| Wire break detection: | 3.5 mA ⁄ 23 mA ⁄ none |
| load impedance voltage: | ≥ 10 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | absolute accuracy: < ±0.05 % of the measurement range, Basic accuracy: < ±0.1°C |
| Configuration: | DIP switch |
| Setting parameters: | Output |
| Configuration: | 4...20 mA |
| Setting parameters: | Sensor error detection |
| Configuration: | enabled |
| Setting parameters: | Output error level |
| Configuration: | downscale |
| Setting parameters: | Noise suppression |
| Configuration: | 50 Hz |
| Setting parameters: | Step response time |
| Configuration: | < 30 ms |
| Setting parameters: | Start temperature |
| Configuration: | -200 °C |
| Setting parameters: | End temperature |
| Configuration: | 0 °C |
| Galvanic isolation: | 3-way isolator |
| Power consumption, max.: | 0.7 W |
| Power consumption, typ.: | 0.49 W |
| Rail: | TS 35 |
| Step response time: | ≤ 30 ms |
| Temperature coefficient: | ≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C |
| Voltage supply: | 24 V DC ± 30 % |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 3-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Product information: | The ACT20M-RTI-AO-S configurable temperature transducer isolates and converts analogue signals. An analogue RTD input signal (Type Pt100) is linearly converted into an analogue output signal and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) and this is done with direct wiring or over the Weidmüller rail bus. |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
| Type: | ACT20M-RTI-AO-S |
| Order No.: | 1375510000 |
| Version: | Temperature converter, 2-/3-/4- wire RTD, With galvanic isolation, Input : Temperature, Output : I / U |
| GTIN (EAN): | 4050118259667 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 89 g |
| Humidity: | 95 %, no condensation |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| MTBF: | 152 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100 / 2-/3-/4-wire |
| Influence of the sensor cable resistance: | < 0.002 Ω⁄Ω (@ 3⁄4-wire) |
| Input measurement range: | PT100 -200…+850 °C |
| Line resistance in measuring circuit: | ≤ 50 Ω |
| Temperature input range: | Configurable, min. measurement range 10°C (RTD) |
| Number of outputs: | 1 |
| Output signal limit: | < 4 mA (average), < 60 mA (pulse current), low duty cycle |
| Output voltage, note: | configurable, 0(2)...10 V, 0(1)...5 V |
| Output current: | configurable, 0...20 mA, 4...20 mA |
| Wire break detection: | 3.5 mA ⁄ 23 mA ⁄ none |
| load impedance voltage: | ≥ 10 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | absolute accuracy: < ±0.05 % of the measurement range, Basic accuracy: < ±0.1°C |
| Configuration: | DIP switch |
| Setting parameters: | Output |
| Configuration: | 4...20 mA |
| Setting parameters: | Sensor error detection |
| Configuration: | enabled |
| Setting parameters: | Output error level |
| Configuration: | downscale |
| Setting parameters: | Noise suppression |
| Configuration: | 50 Hz |
| Setting parameters: | Step response time |
| Configuration: | < 30 ms |
| Setting parameters: | Start temperature |
| Configuration: | -200 °C |
| Setting parameters: | End temperature |
| Configuration: | 0 °C |
| Galvanic isolation: | 3-way isolator |
| Power consumption, max.: | 0.7 W |
| Power consumption, typ.: | 0.49 W |
| Rail: | TS 35 |
| Step response time: | ≤ 30 ms |
| Temperature coefficient: | ≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C |
| Voltage supply: | 24 V DC ± 30 % |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 3-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Product information: | The ACT20M-RTI-AO-S configurable temperature transducer isolates and converts analogue signals. An analogue RTD input signal (Type Pt100) is linearly converted into an analogue output signal and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) and this is done with direct wiring or over the Weidmüller rail bus. |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.09 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |