Article image 1352450000

Weidmueller 1352450000

VPU II 0 150V/40KA

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

Technical parameters

Type: VPU II 0 150V/40KA
Order No.: 1352450000
Version: Surge voltage arrester, Low voltage, Accessories, Spare arrester
GTIN (EAN): 4050118157864
Qty.: 1 pc(s).
Width: 17.8 mm
Width (inches): 0.701 inch
Height: 52 mm
Height (inches): 2.047 inch
Depth: 64 mm
Depth (inches): 2.52 inch
Net weight: 90 g
Humidity: 5 - 95% rel. humidity
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C
Colour: orange
Design: Installation housing; 1TE, Insta IP 20
Optical function display: green = OK; red = arrester is defective - replace
Protection degree: IP20
Rail: TS 35
UL 94 flammability rating: V-0
Version: Spare arrester
Pollution severity: 2
Surge voltage category: III
Rated voltage (AC): 120 V
Voltage type: AC
Max. continuous voltage, Uc (AC): 150 V
Discharge current In (8/20µs) wire-PE: 20 kA
Frequency range, max.: 60 Hz
Frequency range, min.: 50 Hz
Fuse: 125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG
Short-circuit current rating ISCCR: 25 kA
Standards: IEC61643-11, EN61643-11
Protection level Up at IN (L/N-PE): ≤ 0.9 kV
Leakage current at Un: 30 µA
Temporary surge voltage (over-voltage) - TOV: 228 V
Combined pulse UOC: 10 kV
Number of poles: 1
Requirements category acc. to IEC 61643-11: Type II, Type III
Requirements class, acc. to EN 61643-11: T2, T3
Response time: ≤ 25 ns
Type of connection: pluggable
Long specification: Spare arrestor consisting of V0 material for surge voltage arrestor VPU II 150 V series The pluggable high-performance varistors can be exchanged by trained personnel following a failure. Rated voltage: 150 V Type: Weidmüller VPU II 0 150 V/30 kA Order No.: 1352450000
Short specification: Spare arrester for surge voltage arrester VPU II 150 V series The pluggable high-performance varistors can be swapped by trained personnel following a failure. Rated voltage: 150 V Type: Weidmüller VPU II 0 150 V/30 kA Order no.: 1352450000
ETIM 6.0: EC000941
ETIM 7.0: EC000941
eClass 9.0: 27-13-08-05
eClass 9.1: 27-13-08-05
eClass 10.0: 27-13-08-05
UNSPSC: 30-21-19-21
ROHS: Conform
Type: VPU II 0 150V/40KA
Order No.: 1352450000
Version: Surge voltage arrester, Low voltage, Accessories, Spare arrester
GTIN (EAN): 4050118157864
Qty.: 1 pc(s).
Width: 17.8 mm
Width (inches): 0.701 inch
Height: 52 mm
Height (inches): 2.047 inch
Depth: 64 mm
Depth (inches): 2.52 inch
Net weight: 90 g
Humidity: 5 - 95% rel. humidity
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C
Colour: orange
Design: Installation housing; 1TE, Insta IP 20
Optical function display: green = OK; red = arrester is defective - replace
Protection degree: IP20
Rail: TS 35
UL 94 flammability rating: V-0
Version: Spare arrester
Pollution severity: 2
Surge voltage category: III
Rated voltage (AC): 120 V
Voltage type: AC
Max. continuous voltage, Uc (AC): 150 V
Discharge current In (8/20µs) wire-PE: 20 kA
Frequency range, max.: 60 Hz
Frequency range, min.: 50 Hz
Fuse: 125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG
Short-circuit current rating ISCCR: 25 kA
Standards: IEC61643-11, EN61643-11
Protection level Up at IN (L/N-PE): ≤ 0.9 kV
Leakage current at Un: 30 µA
Temporary surge voltage (over-voltage) - TOV: 228 V
Combined pulse UOC: 10 kV
Number of poles: 1
Requirements category acc. to IEC 61643-11: Type II, Type III
Requirements class, acc. to EN 61643-11: T2, T3
Response time: ≤ 25 ns
Type of connection: pluggable
Long specification: Spare arrestor consisting of V0 material for surge voltage arrestor VPU II 150 V series The pluggable high-performance varistors can be exchanged by trained personnel following a failure. Rated voltage: 150 V Type: Weidmüller VPU II 0 150 V/30 kA Order No.: 1352450000
Short specification: Spare arrester for surge voltage arrester VPU II 150 V series The pluggable high-performance varistors can be swapped by trained personnel following a failure. Rated voltage: 150 V Type: Weidmüller VPU II 0 150 V/30 kA Order no.: 1352450000
ETIM 6.0: EC000941
ETIM 7.0: EC000941
eClass 9.0: 27-13-08-05
eClass 9.1: 27-13-08-05
eClass 10.0: 27-13-08-05
UNSPSC: 30-21-19-21
ROHS: Conform

Logistic parameters

ECCN:
Country of Origin:
EAN:
Weight: 0.09 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m