View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
1241350000
IE-SW-PL18M-2GC14TX2SCS
Request a Quote
Image copyright: Weidmueller
Weidmueller 1241350000
IE-SW-PL18M-2GC14TX2SCS
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Type: | IE-SW-PL18M-2GC14TX2SCS |
| Order No.: | 1241350000 |
| Version: | Network switch, managed, Fast/Gigabit Ethernet, Number of ports: 14 * RJ45 10/100BaseT(X), 2x SC Single-mode, 2 * combo-ports (10/100/1000BaseT(X) or 1000BaseSFP), IP30, 0 °C...60 °C |
| GTIN (EAN): | 4050118029307 |
| Qty.: | 1 pc(s). |
| Width: | 94 |
| Width (inches): | 3.701 inch |
| Height: | 135 mm |
| Height (inches): | 5.315 inch |
| Depth: | 142.7 mm |
| Depth (inches): | 5.618 inch |
| Net weight: | 1,630 g |
| REACH SVHC: | Lead 7439-92-1 |
| EMC standards: | EN 55032, EN 55024, CISPR 32, FCC Part 15 Subpart B Class A, IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 Ghz: 10 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0,5 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 |
| Safety standard: | UL508, UL 60950-1, EN 60950-1 |
| Explosive risk zone: | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc |
| Ship use: | DNV-GL |
| Shock: | according to IEC 60068-2-27 |
| Vibration: | according to IEC 60068-2-6 |
| Free fall: | According to IEC 60068-2-32 |
| Humidity: | 5 to 95 % (non-condensing) |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Transmission rate: | 100 Mbps |
| Transceiver type: | Singlemode |
| Connector type: | SC-Duplex |
| Transmission distance, typ.: | 40 km |
| typ.: | 1,310 nm |
| Wavelength: | TX |
| min.: | 1,280 nm |
| max.: | 1,340 nm |
| Wavelength: | RX |
| min.: | 1,100 nm |
| max.: | 1,600 nm |
| min.: | -34 dBm |
| max.: | -3 dBm |
| min.: | -5 dBm |
| max.: | 0 dBm |
| Time interval: | 5 years |
| Alarm contact: | 2 relay outputs with a current capacity of 1 A at 24 V DC |
| Console port interface: | RS-232 |
| Fibre-optic ports: | 100BaseFX ports (SC connector), Singlemode, 1000BaseSFP-Slot |
| LED indicator: | PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M (TP-Port), 100M (fibre-optic port)., 1000M (Gigabit-Port) |
| Note 1: | When connecting a single-mode fiber transceiver over a short distance, we recommend using an attenuator to prevent the transceiver from being damaged by excessive optical power. |
| Number of ports: | 14 * RJ45 10/100BaseT(X), 2x SC Single-mode, 2 * combo-ports (10/100/1000BaseT(X) or 1000BaseSFP) |
| RJ45 ports: | 10/100BaseT(X) or 10/100/1000BaseT(X), auto negotiation |
| MTBF: | 240,000 hrs |
| Database: | Telcordia (Bellcore), GB |
| Device configuration: | Webbrowser (HTTP/HTTPS), SNMP v1/v2c/v3, Telnet console, Local serial console port (RS-232 via RJ-45 port), Windows tool |
| Monitoring function: | SNMP v1/v2c/v3, Link Layer Discovery Protocol (LLDP), Port mirroring, Port statistics, Port monitoring, Syslog, RMON (Remote monitoring), Event based warning via E-Mail, Event based warning via relay, Event based warning via SNMP trap |
| Network redundancy: | Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), Turbo-Ring (recovery time <20/50 ms at Fast/Gigabit Ethernet interface), Turbo-Chain (recovery time <20/50 ms at Fast/Gigabit Ethernet interface), Link Aggregation Control Protocol (LACP) |
| Network traffic filter: | Quality of Service (QoS), Tag based VLAN, Port based VLAN, IGMP v1/v2, GMRP, Traffic Rate Limiting |
| IP-address management: | Static, BootP, RARP, DHCP-Client, DHCP-Server (port based), DHCP Option 82 (Relay Agent) |
| Security functions: | VLAN segmentation, Enable/disable ports, Access control (port based via IEEE 802.1X), Access control list (MAC-based), Loop protection, TACACS+ and IEEE 802.1X User Authentication |
| Time synchronization management: | SNTP client, NTP client, PTPv1 |
| Industrial protocol support: | PROFINET device acc. to conformance class B, EtherNet/IP, Modbus/TCP slave |
| Connection type: | 2 removable 6-pin terminal blocks |
| Voltage: | 24 V DC |
| Current: | 0.61 A |
| Overload current protection: | Existing |
| Reverse polarity protection: | Available |
| Voltage supply: | 24 V DC, 2 redundant inputs |
| Voltage type: | DC |
| Voltage, min.: | 12 V |
| Voltage, max.: | 45 V |
| Bandwidth backplane: | 7.2 Gbps |
| IGMP-Groups: | 256 |
| MAC table size: | 8 K |
| Max. number of available VLANs: | 64 |
| Packet buffer size: | 2 Mbit |
| Priority queues: | 4 |
| VLAN-ID max: | 4,094 |
| VLAN-ID min: | 1 |
| Housing main material: | metal |
| Protection degree: | IP30 |
| Type of mounting: | DIN rail, Panel (with optional mounting kit) |
| Data switching: | Store and Forward |
| Flow control: | IEEE 802.3x flow control, Back pressure flow control |
| MIB: | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| Standard: | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseX, IEEE 802.3x for flow control, IEEE 802.1D-2004 for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for authentication, IEEE 802.3ad for port trunk with LACP |
| ETIM 6.0: | EC000734 |
| ETIM 7.0: | EC000734 |
| eClass 9.0: | 19-17-01-06 |
| eClass 9.1: | 19-17-01-06 |
| eClass 10.0: | 19-17-04-01 |
| ROHS: | Conform |
| Type: | IE-SW-PL18M-2GC14TX2SCS |
| Order No.: | 1241350000 |
| Version: | Network switch, managed, Fast/Gigabit Ethernet, Number of ports: 14 * RJ45 10/100BaseT(X), 2x SC Single-mode, 2 * combo-ports (10/100/1000BaseT(X) or 1000BaseSFP), IP30, 0 °C...60 °C |
| GTIN (EAN): | 4050118029307 |
| Qty.: | 1 pc(s). |
| Width: | 94 |
| Width (inches): | 3.701 inch |
| Height: | 135 mm |
| Height (inches): | 5.315 inch |
| Depth: | 142.7 mm |
| Depth (inches): | 5.618 inch |
| Net weight: | 1,630 g |
| REACH SVHC: | Lead 7439-92-1 |
| EMC standards: | EN 55032, EN 55024, CISPR 32, FCC Part 15 Subpart B Class A, IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 Ghz: 10 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0,5 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 |
| Safety standard: | UL508, UL 60950-1, EN 60950-1 |
| Explosive risk zone: | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc |
| Ship use: | DNV-GL |
| Shock: | according to IEC 60068-2-27 |
| Vibration: | according to IEC 60068-2-6 |
| Free fall: | According to IEC 60068-2-32 |
| Humidity: | 5 to 95 % (non-condensing) |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Transmission rate: | 100 Mbps |
| Transceiver type: | Singlemode |
| Connector type: | SC-Duplex |
| Transmission distance, typ.: | 40 km |
| typ.: | 1,310 nm |
| Wavelength: | TX |
| min.: | 1,280 nm |
| max.: | 1,340 nm |
| Wavelength: | RX |
| min.: | 1,100 nm |
| max.: | 1,600 nm |
| min.: | -34 dBm |
| max.: | -3 dBm |
| min.: | -5 dBm |
| max.: | 0 dBm |
| Time interval: | 5 years |
| Alarm contact: | 2 relay outputs with a current capacity of 1 A at 24 V DC |
| Console port interface: | RS-232 |
| Fibre-optic ports: | 100BaseFX ports (SC connector), Singlemode, 1000BaseSFP-Slot |
| LED indicator: | PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M (TP-Port), 100M (fibre-optic port)., 1000M (Gigabit-Port) |
| Note 1: | When connecting a single-mode fiber transceiver over a short distance, we recommend using an attenuator to prevent the transceiver from being damaged by excessive optical power. |
| Number of ports: | 14 * RJ45 10/100BaseT(X), 2x SC Single-mode, 2 * combo-ports (10/100/1000BaseT(X) or 1000BaseSFP) |
| RJ45 ports: | 10/100BaseT(X) or 10/100/1000BaseT(X), auto negotiation |
| MTBF: | 240,000 hrs |
| Database: | Telcordia (Bellcore), GB |
| Device configuration: | Webbrowser (HTTP/HTTPS), SNMP v1/v2c/v3, Telnet console, Local serial console port (RS-232 via RJ-45 port), Windows tool |
| Monitoring function: | SNMP v1/v2c/v3, Link Layer Discovery Protocol (LLDP), Port mirroring, Port statistics, Port monitoring, Syslog, RMON (Remote monitoring), Event based warning via E-Mail, Event based warning via relay, Event based warning via SNMP trap |
| Network redundancy: | Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), Turbo-Ring (recovery time <20/50 ms at Fast/Gigabit Ethernet interface), Turbo-Chain (recovery time <20/50 ms at Fast/Gigabit Ethernet interface), Link Aggregation Control Protocol (LACP) |
| Network traffic filter: | Quality of Service (QoS), Tag based VLAN, Port based VLAN, IGMP v1/v2, GMRP, Traffic Rate Limiting |
| IP-address management: | Static, BootP, RARP, DHCP-Client, DHCP-Server (port based), DHCP Option 82 (Relay Agent) |
| Security functions: | VLAN segmentation, Enable/disable ports, Access control (port based via IEEE 802.1X), Access control list (MAC-based), Loop protection, TACACS+ and IEEE 802.1X User Authentication |
| Time synchronization management: | SNTP client, NTP client, PTPv1 |
| Industrial protocol support: | PROFINET device acc. to conformance class B, EtherNet/IP, Modbus/TCP slave |
| Connection type: | 2 removable 6-pin terminal blocks |
| Voltage: | 24 V DC |
| Current: | 0.61 A |
| Overload current protection: | Existing |
| Reverse polarity protection: | Available |
| Voltage supply: | 24 V DC, 2 redundant inputs |
| Voltage type: | DC |
| Voltage, min.: | 12 V |
| Voltage, max.: | 45 V |
| Bandwidth backplane: | 7.2 Gbps |
| IGMP-Groups: | 256 |
| MAC table size: | 8 K |
| Max. number of available VLANs: | 64 |
| Packet buffer size: | 2 Mbit |
| Priority queues: | 4 |
| VLAN-ID max: | 4,094 |
| VLAN-ID min: | 1 |
| Housing main material: | metal |
| Protection degree: | IP30 |
| Type of mounting: | DIN rail, Panel (with optional mounting kit) |
| Data switching: | Store and Forward |
| Flow control: | IEEE 802.3x flow control, Back pressure flow control |
| MIB: | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| Standard: | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseX, IEEE 802.3x for flow control, IEEE 802.1D-2004 for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for authentication, IEEE 802.3ad for port trunk with LACP |
| ETIM 6.0: | EC000734 |
| ETIM 7.0: | EC000734 |
| eClass 9.0: | 19-17-01-06 |
| eClass 9.1: | 19-17-01-06 |
| eClass 10.0: | 19-17-04-01 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 2.176 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |