View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Weidmueller
1176040000
ACT20M-CI-CO-OLP-S
Request a Quote
Image copyright: Weidmueller
Weidmueller 1176040000
ACT20M-CI-CO-OLP-S
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Technical parameters
| Type: | ACT20M-CI-CO-OLP-S |
| Order No.: | 1176040000 |
| Version: | Signal converter/insulator, Output current loop powered, 1-channel, Input : 4-20 mA, Output : 4-20 mA |
| GTIN (EAN): | 4032248970155 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 80 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...70 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | 2-wire transmitter (without own power supply) |
| Sensor supply: | 6…35 V (@ 20 mA) |
| Input current: | 4…20mA |
| Voltage drop, current input: | Typical 2.5 V |
| Number of outputs: | 1 |
| Output current: | 4...20 mA |
| Cut-off frequency (-3 dB): | 100 Hz |
| Load impedance current: | ≤600 Ω (channel 1 + 2), @ max 23mA |
| Supply voltage (output): | 6…35 V |
| Accuracy: | < 0.05 % of measuring range |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Power consumption, max.: | 0.5 W |
| Rail: | TS 35 |
| Step response time: | ≤ 5 ms |
| Voltage supply: | Output loop powered |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 2-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Product information: | The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. Power is supplied through the output measuring circuit (output loop-powered). |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-20 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| Type: | ACT20M-CI-CO-OLP-S |
| Order No.: | 1176040000 |
| Version: | Signal converter/insulator, Output current loop powered, 1-channel, Input : 4-20 mA, Output : 4-20 mA |
| GTIN (EAN): | 4032248970155 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 80 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...70 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | 2-wire transmitter (without own power supply) |
| Sensor supply: | 6…35 V (@ 20 mA) |
| Input current: | 4…20mA |
| Voltage drop, current input: | Typical 2.5 V |
| Number of outputs: | 1 |
| Output current: | 4...20 mA |
| Cut-off frequency (-3 dB): | 100 Hz |
| Load impedance current: | ≤600 Ω (channel 1 + 2), @ max 23mA |
| Supply voltage (output): | 6…35 V |
| Accuracy: | < 0.05 % of measuring range |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Power consumption, max.: | 0.5 W |
| Rail: | TS 35 |
| Step response time: | ≤ 5 ms |
| Voltage supply: | Output loop powered |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 2-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Product information: | The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. Power is supplied through the output measuring circuit (output loop-powered). |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-20 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.088 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |