1045931
PTFIX 2X1,5 YE
Number of levels: | 1 |
Number of connections: | 2 |
Potentials: | 1 |
Nominal cross section: | 1.5 mm² |
Color: | yellow |
Insulating material: | PA |
Flammability rating according to UL 94: | V0 |
Rated surge voltage: | 6 kV |
Degree of pollution: | 3 |
Overvoltage category: | III |
Insulating material group: | I |
Maximum power dissipation for nominal condition: | 0.56 W |
Maximum load current: | 21 A (with a 2.5 mm² conductor cross section) |
Maximum total current: | 21 A |
Nominal current IN: | 17.5 A |
Nominal voltage UN: | 450 V |
Open side panel: | No |
Ambient temperature (operation): | -60 °C ... 85 °C |
Ambient temperature (storage/transport): | -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) |
Permissible humidity (storage/transport): | 30 % ... 70 % |
Ambient temperature (assembly): | -5 °C ... 70 °C |
Ambient temperature (actuation): | -5 °C ... 70 °C |
Shock protection test specification: | DIN EN 50274 (VDE 0660-514):2002-11 |
Back of the hand protection: | guaranteed |
Finger protection: | guaranteed |
Result of surge voltage test: | Test passed |
Result of power-frequency withstand voltage test: | Test passed |
Power frequency withstand voltage setpoint: | 1.89 kV |
Result of the test for mechanical stability of terminal points (5 x conductor connection): | Test passed |
Result of bending test: | Test passed |
Bending test rotation speed: | 10 rpm |
Bending test turns: | 135 |
Bending test conductor cross section/weight: | 0.14 mm² / 0.2 kg |
Tensile test result: | Test passed |
Result of tight fit on support: | Test passed |
Tight fit on carrier: | NS 35/NS 15 |
Setpoint: | 1 N |
Result of voltage-drop test: | Test passed |
Result of temperature-rise test: | Test passed |
Requirement temperature-rise test: | Increase in temperature ≤ 45 K |
Short circuit stability result: | Test passed |
Conductor cross section short circuit testing: | 1.5 mm² |
Short-time current: | 0.18 kA |
Conductor cross section short circuit testing: | 2.5 mm² |
Short-time current: | 0.3 kA |
Result of thermal test: | Test passed |
Ageing test for screwless modular terminal block temperature cycles: | 192 |
Proof of thermal characteristics (needle flame) effective duration: | 30 s |
Result of aging test: | Test passed |
Oscillation, broadband noise test result: | Test passed |
Test specification, oscillation, broadband noise: | DIN EN 50155 (VDE 0115-200):2018-05 |
Test spectrum: | Service life test category 2, bogie-mounted |
Test frequency: | f1 = 5 Hz to f2 = 250 Hz |
ASD level: | 6.12 (m/s2)2/Hz |
Acceleration: | 3.12 g |
Test duration per axis: | 5 h |
Test directions: | X-, Y- and Z-axis |
Shock test result: | Test passed |
Test specification, shock test: | DIN EN 50155 (VDE 0115-200):2018-05 |
Shock form: | Half-sine |
Acceleration: | 30g |
Shock duration: | 18 ms |
Number of shocks per direction: | 3 |
Test directions: | X-, Y- and Z-axis (pos. and neg.) |
Relative insulation material temperature index (Elec., UL 746 B): | 130 °C |
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): | 125 °C |
Static insulating material application in cold: | -60 °C |
Surface flammability NFPA 130 (ASTM E 162): | passed |
Specific optical density of smoke NFPA 130 (ASTM E 662): | passed |
Calorimetric heat release NFPA 130 (ASTM E 1354): | 27,5 MJ/kg |
Smoke gas toxicity NFPA 130 (SMP 800C): | passed |
Fire protection for rail vehicles (DIN EN 45545-2) R22: | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R23: | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R24: | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R26: | HL 1 - HL 3 |
Width: | 4.2 mm |
Length: | 21.6 mm |
Height: | 17.7 mm |
Connection method: | Push-in connection |
Stripping length: | 8 mm ... 10 mm |
Connection in acc. with standard: | IEC 60998-2-2 |
Conductor cross section solid min.: | 0.14 mm² |
Conductor cross section solid max.: | 2.5 mm² |
Conductor cross section AWG min.: | 26 |
Conductor cross section AWG max.: | 14 |
Conductor cross section flexible min.: | 0.14 mm² |
Conductor cross section flexible max.: | 1.5 mm² |
Min. AWG conductor cross section, flexible: | 26 |
Max. AWG conductor cross section, flexible: | 14 |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.14 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 1.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.14 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 1.5 mm² |
Connection cross sections directly pluggable: | 0.34 mm² 2.5 mm² 26 14 |
Conductor cross section solid min.: | 0.34 mm² |
Conductor cross section solid max.: | 2.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.34 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 1.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.34 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 1.5 mm² |
Internal cylindrical gage: | A1 / B1 |
Connection in acc. with standard: | IEC 60998-2-2 |
Flammability rating according to UL 94: | V0 |
China RoHS: | Environmentally friendly use period: unlimited = EFUP-e |
eCl@ss 10.0.1: | 27141120 |
eCl@ss 4.0: | 27141120 |
eCl@ss 4.1: | 27141120 |
eCl@ss 5.0: | 27141120 |
eCl@ss 5.1: | 27141120 |
eCl@ss 6.0: | 27141100 |
eCl@ss 7.0: | 27141120 |
eCl@ss 8.0: | 27141120 |
eCl@ss 9.0: | 27141120 |
ETIM 2.0: | EC000897 |
ETIM 3.0: | EC000897 |
ETIM 4.0: | EC000897 |
ETIM 5.0: | EC000897 |
ETIM 6.0: | EC000897 |
ETIM 7.0: | EC000897 |
UNSPSC 6.01: | 30211811 |
UNSPSC 7.0901: | 39121410 |
UNSPSC 11: | 39121410 |
UNSPSC 12.01: | 39121410 |
UNSPSC 13.2: | 39121410 |
UNSPSC 18.0: | 39121410 |
UNSPSC 19.0: | 39121410 |
UNSPSC 20.0: | 39121410 |
UNSPSC 21.0: | 39121410 |
ECCN: | |
Country of Origin: | PL |
EAN: | |
Weight: | 0.002 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |