Pepperl+Fuchs
807914
SU19/110/115a/126a
Pepperl+Fuchs 807914
SU19/110/115a/126a
Fiber optic sensor
Description
The fiber optics amplifier SU19 with display was developed to set a benchmark with the most comfortable and user-friendly interface. This simplicity of the settings decreases the costs of ownership significantly. Classic Series fiber optic sensor with display, master module, push-pull output, fixed cable with M8 plug, Classic line with display , AGC (Automatic Gain Control) for faster teach-in, Gang mounting for easy wiring, Transparency recognition, 30 µs High Speed Modefa. The whole Teach-In process of objects is time-saving due to an easy Teach-In algorithm. The high resolution 4-digit percentage display indicates current values and thresholds with highest accuracy. Wire-saving and the replacement of devices is designed user-friendly and time-saving due to gang mounting on the rear.
Technical parameters
| Sensor range: | up to 150 mm (KLR-C02-2,2-2,0-K146) |
| Detection range: | up to 450 mm (KLE-C01-2,2-2,0-K116) |
| Light source: | LED |
| Light type: | modulated visible red light , 660 nm |
| Ambient light limit: | 10000 Lux |
| Gang mounting: | maximum 20 units |
| MTTFd: | 500 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Diagnostics indicator: | 7-segment display |
| Function indicator: | LED yellow: static illumination switching state, flashes when falling short of the stability control |
| Control elements: | Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 30 mA |
| Pre-fault indication output: | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected |
| Switching type: | light/dark on selectable programmable |
| Signal output: | 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Voltage drop: | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA |
| Switching frequency: | High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz |
| Response time: | High speed mode: 30 µs , Standard mode: 160 µs , High resolution: 2 ms , Automatic: 160 µs ~ 2 ms (choice by the sensor), Glass mode: 2 ms |
| Repeat accuracy: | ≤ 0.5 % of adjusted sensor range |
| Timer function: | ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 ... 999 ms in 1 ms increments |
| Standard conformity: Product standard: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| UL approval: | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -10 ... 55 °C (14 ... 131 °F) |
| Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
| Housing width: | 9 mm |
| Housing height: | 34.5 mm |
| Housing depth: | 62.3 mm |
| Degree of protection: | IP50 |
| Connection: | 200 mm, PVC cable with M8 connector, 4-pin |
| Material: Housing: | PC |
| Mass: | 45 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |