View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
800181
VL18-54-M-LAS/32/40a/82b/118
Request a Quote
Pepperl+Fuchs 800181
VL18-54-M-LAS/32/40a/82b/118
Retroreflective sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Retroreflective sensor with polarization filter, M18 threaded housing made of brass, nickel plated, Visible red light, pulsed LASER light, Array control panel with highly visible LED display, Flashing power on LED in case of short-circuit, Multiple device installation possible, no mutual interference (no cross-talk)fa
Technical parameters
| Effective detection range: | 0 ... 18 m |
| Reflector distance: | 0.06 ... 18 m |
| Threshold detection range: | 20 m |
| Reference target: | H85 reflector |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 655 nm |
| Laser nominal ratings: Beam divergence: | 7.5 mrad |
| Laser nominal ratings: Pulse length: | 4 µs |
| Laser nominal ratings: Repetition rate: | 11.91 kHz |
| Laser nominal ratings: max. pulse energy: | 2.25 nJ |
| Diameter of the light spot: | 150 mm x 100 mm at a distance of 12 m |
| Angle of divergence: | 1 ° |
| Optical face: | frontal |
| Ambient light limit: | 30000 Lux |
| Hysteresis: | < 15 % |
| MTTFd: | 700 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green, flashes in case of short-circuit |
| Function indicator: | LED yellow, light with free light beam , flashes when falling short of the stability control , OFF when light beam is interrupted |
| Control elements: | Sensitivity adjuster, light/dark switch |
| Operating voltage: | 10 ... 30 V DC , class 2 |
| No-load supply current: | < 20 mA |
| Protection class: | II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Pre-fault indication output: | 1 PNP, inactive when falling short of the stability control |
| Switching type: | light/dark on, switchable |
| Signal output: | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | 30 V DC |
| Switching current: | max. 200 mA |
| Voltage drop: | ≤ 2.5 V DC |
| Switching frequency: | 500 Hz |
| Response time: | 1 ms |
| Product standard: | EN 60947-5-2 |
| Standard conformity: Laser class: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| UL approval: | cULus Listed, Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 55 °C (-13 ... 131 °F) |
| Storage temperature: | -30 ... 70 °C (-22 ... 158 °F) |
| Degree of protection: | IP67 |
| Connection: | 4-pin, M12 x 1 connector |
| Material: Housing: | brass, nickel-plated |
| Material: Optical face: | PMMA |
| Mass: | 60 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |