View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
421130
RL28-55-Z/47/82b/112
Request a Quote
Pepperl+Fuchs 421130
RL28-55-Z/47/82b/112
Retroreflective sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Retroreflective sensor with polarization filter, Ultra bright LEDs for power on, weak signal indication and switching state, Programmable time function GAN, GAB, IAB and GAN-IAB as double function, Not sensitive to ambient light, even with switched energy saving lamps, Waterproof, degree of protection IP67, Protection class IIfa
Technical parameters
| Effective detection range: | 0 ... 17 m |
| Reflector distance: | 0.05 ... 17 m |
| Threshold detection range: | 21 m |
| Reference target: | H85-2 reflector |
| Light source: | LED |
| Light type: | modulated visible red light , 660 nm |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 290 mm at a distance of 17 m |
| Angle of divergence: | emitter 1.2° receiver 2° |
| Ambient light limit: | 80000 Lux |
| MTTFd: | 690 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Control elements: | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 40 mA |
| Pre-fault indication output: | 1 PNP, inactive when falling short of the stability control for 10;s immediately inactive if 4 light beam interruptions take place |
| Switching type: | light/dark on, switchable . (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.) |
| Signal output: | 2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 200 mA |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Timer function: | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment interval 0.02 s ... 1 s |
| Product standard: | EN 60947-5-2 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 75 °C (-40 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 65.5 mm |
| Degree of protection: | IP67 |
| Connection: | 5-pin, M12 x 1 connector, 90° rotatable |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | plastic |
| Material: Connector: | metal |
| Mass: | approx. 100 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |