Pepperl+Fuchs
284447
OBE10M-R103-S2EP-IO
Pepperl+Fuchs 284447
OBE10M-R103-S2EP-IO
Thru-beam sensor
Description
The R103 series miniature optical sensors are the first devices of their kind to offer an endto- end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. Thru-beam sensor SET, Miniature design with versatile mounting options, IO-link interface for service and process data, Various frequencies for avoiding mutual interference (cross-talk immunity), Extended temperature range. 40°C ... 60°C, High degree of protection IP69Kfa. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.
Technical parameters
| Emitter: | OBE10M-R103-S-IO |
| Receiver: | OBE10M-R103-2EP-IO |
| Effective detection range: | 0 ... 10 m |
| Threshold detection range: | 12.5 m |
| Light source: | LED |
| Light type: | modulated visible red light |
| LED risk group labelling: | exempt group |
| Diameter of the light spot: | approx. 65 mm at a distance of 1 m |
| Angle of divergence: | 3.7 ° |
| MTTFd: | 462 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Function indicator: | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Control elements: | Receiver: light/dark switch |
| Operating voltage: | 10 ... 30 V DC |
| Interface type: | IO-Link ( via C/Q = pin 4 ) |
| IO-Link Revision: | 1.1 |
| Min. cycle time: | 2.3 ms |
| Process data width: | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
| Compatible master port type: | A |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on |
| Signal output: | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Usage category: | DC-12 and DC-13 |
| Directive conformity: EMC Directive 2004/108/EC: | EN 60947-5-2:2007+A1:2012 |
| Standard conformity: Product standard: | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| Housing width: | 15 mm |
| Housing height: | 36.5 mm |
| Housing depth: | 26.7 mm |
| Degree of protection: | IP67 / IP69 / IP69K |
| Connection: | 2 m fixed cable |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |