282837
NBB8-30GM60-I3
Inductive analog sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: cable PVC , 2 m, Degree of protection: IP67fa
| Output type: | Analog current output |
| Installation: | flush |
| Output polarity: | DC |
| Measurement range: | 3 ... 8 mm |
| Output type: | 3-wire |
| Operating voltage: | 15 ... 30 V DC |
| Repeat accuracy: | 0 ... 200 µm |
| Recovery time: | 1 ... 10 ms typ. 5 ms |
| No-load supply current: | ≤ 12 mA |
| Output type: | 0 ... 20 mA |
| Slope of output characteristic: | 4 mA / mm |
| Linearity error: | ≤ ± 5 % of full-scale value |
| Load resistor: | ≤ 500 Ω |
| Rate of current rise: 0 ... 20 mA: | ≤ 50 A/s |
| Rate of current rise: 20 ... 0 mA: | ≤ 20 A/s |
| Temperature drift: | ≤ ± 0.15 %/K of the measured value |
| Residual ripple: | ± 125 µA |
| Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| UL approval: | cULus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type: | cable PVC , 2 m |
| Core cross-section: | 0.75 mm2 |
| Housing material: | brass, nickel-plated |
| Sensing face: | PBT |
| Degree of protection: | IP67 |
| Cable: Cable diameter: | 6.4 mm ± 0.2 mm |
| Cable: Bending radius: | > 10 x cable diameter |
| ECCN: | |
| Country of Origin: | ID |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |