Pepperl+Fuchs
274815
UMB800-18H40-E5-2M-FA
Pepperl+Fuchs 274815
UMB800-18H40-E5-2M-FA
Ultrasonic sensor
Description
Single head system, Front of transducer and housing manufactured entirely from stainless steel, Hygienic design, easy to clean, Degree of protection IP68 / IP69K, Series: -18H, Housing: stainless steel 1.4404 / AISI 316L, Connection type: cable PUR , 2 m , Polyether basedfa. The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. Due to its special design, this sensor is EHEDG compliant, and together with an appropriate fixture are especially suitable for applications where there are increased hygiene requirements, such as in the manufacture and handling of food. For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used, even in applications without special hygiene requirements.
Technical parameters
| Sensing range: | 70 ... 800 mm |
| Adjustment range: | 90 ... 800 mm |
| Dead band: | 0 ... 70 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 170 kHz |
| Response delay: | approx. 100 ms |
| Operating voltage: | 10 ... 30 V DC |
| No-load supply current: | ≤ 15 mA |
| Input type: | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
| Output type: | 1 switching output E5, PNP NO/NC, programmable |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 3 V |
| Repeat accuracy: | ± 0.5 % of full-scale value |
| Switching frequency: | ≤ 4 Hz |
| Range hysteresis: | 1 % of the set operating distance |
| Temperature influence: | ± 1.5 % of full-scale value |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| EHEDG: | Type EL Class I AUX |
| ECOLAB: | yes |
| Ambient temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | cable PUR , 2 m , Polyether based |
| Core cross-section: | 4 x 0.19 mm2 |
| Degree of protection: | IP68 / IP69K |
| Material: Housing: | stainless steel 1.4404 / AISI 316L |
| Material: Transducer: | Stainless steel 1.4435 / AISI 316L |
| Material: Seal: | Cable seal : TPU , Elastollan 1185 A10 (FDA) |
| Mass: | 90 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |