Pepperl+Fuchs
267022
MBHC-FB-4R
Pepperl+Fuchs 267022
MBHC-FB-4R
Compact Fieldbus Power Hub Motherboard with Common Interface
Description
4 segments, redundant, individual modules per segment, Supports all PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1pa. The FieldConnex. Compact Power Hub is a modular fieldbus power supply for four segments with lowest power dissipation and smallest foot print. It supports explosion protection e.g. the High-Power Trunk for longest cable run and highest device count. The Power Hub supports optional Advanced Diagnostics for fast fieldbus commissioning and online monitoring. The motherboard for redundant power supply modules is the wiring interface with connectors for all DCS and PLC host systems. Sockets for all modules enable simple installation and replacement without tools. For power redundancy with seamless transfer, pairs of modules feed each segment. Wire connections can be selected as spring terminals or screw terminals. This design allows the most compact cabinet layout. Excellent availability and a very long service life are achieved through: passive impedance filter per segment, high-availability fieldbus termination and plug-in connectors with retaining screws. Electronics are optimized for lowest power dissipation and compactness.
Technical parameters
| Design / Mounting: | Motherboard based |
| Connection: | redundant |
| Rated voltage: | 19.2 ... 35 V SELV/PELV |
| Rated current: | 12 A |
| Power dissipation: | typ. 0.4 W per segment |
| Number of segments: | 4 redundant |
| Host-side: | general purpose host |
| Terminating resistor: | 100 Ω integrated |
| Fault signal: | VFC alarm 1 A, 50 V DC, normally closed |
| Fieldbus segment/Fieldbus segment: | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Fieldbus segment/Supply: | functional insulation acc. to IEC 62103, rated insulation voltage 250 Veff |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Electromagnetic compatibility: | NE 21:2011 |
| Degree of protection: | IEC 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Ambient temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | < 95 % non-condensing |
| Shock resistance: | 10 g , 11 ms |
| Vibration resistance: | 1 g , 10 ... 150 Hz |
| Pollution degree: | max. 2, according to IEC 60664 |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 |
| Connection type: | plug-in terminals , spring terminal and screw terminal |
| Core cross-section: | 2.5 mm2 |
| Housing material: | Polycarbonate |
| Degree of protection: | IP20 |
| Mass: | approx. 580 g |
| Mounting: | DIN mounting rail |
| Certificate: | TÜV 10 ATEX 555761X |
| Electromagnetic compatibility: Marking: | II 3G Ex nA IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| FM approval: | CoC 3024816, CoC 3024816C |
| Directive conformity: Approved for: | Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nA IIC T4 |
| IECEx approval: | IECEx TUN 13.0037X |
| Directive conformity: Approved for: | Ex nA IIC T4 Gc |
| Marine approval: | DNV A-14038 |
| Supplementary information: | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
Logistic parameters
| ECCN: | |
| Country of Origin: | Singapur |
| EAN: | 4050143075539 |
| Weight: | 0.84 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |