256941
M-LB-EX-5000.SP
Base Module
Base for protection module, Easy replacement of modules without tools, Connection via spring terminals with push-in connection technology, DIN rail mountable, Up to SIL 3 acc. to IEC 61508pa. The device is the base for the modules of the surge protection system:. Protection modules. Place-holder modules. These modules are connected to the device. The protected and unprotected signal lines are connected to the device. The plugged modules will be grounded via the integrated earth connection. The terminals of the base module are suitable for the connection of conductors and plug‑in jumpers. The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
| Number of signal lines: | 2 |
| Safety Integrity Level (SIL): | SIL 3 |
| Rated voltage: | 30 V AC/DC |
| Rated current: | 2 A |
| Connection: | terminals 1, 2 |
| Connection: | terminals 3, 4 |
| Degree of protection: | IEC 60529:2013 |
| Functional safety: | IEC/EN 61508:2010 |
| Surge protective devices for low voltage: | EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012 |
| Ambient temperature: | -40 ... 80 °C (-40 ... 176 °F) Observe the temperature range of the protection module, which is limited by derating. |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | max. 95 % , without condensation |
| Degree of protection: | IP20 |
| Connection: | spring terminals , max. core cross section 1 x 2.5 mm2 |
| Mass: | approx. 40 g |
| Dimensions: | 6.2 x 72 x 112 mm |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate: | BVS 17 ATEX E 069 X |
| IECEx approval: IECEx certificate: | IECEx BVS 17.0061X |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| ECCN: | |
| Country of Origin: | Polen |
| EAN: | 4050143064564 |
| Weight: | 0.04 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |