View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
233601
KCD0-SD-Ex1.1245
Request a Quote
Pepperl+Fuchs 233601
KCD0-SD-Ex1.1245
Solenoid Driver
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
This isolated barrier is used for intrinsic safety applications. 1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 45 mA at 12 V DC, Housing width 12.5 mm, Up to SIL 3 acc. to IEC 61508pa. The device supplies power to solenoids, LEDs and audible alarms located in a hazardous area. The device is loop powered, so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load, 12 V at 45 mA is available for the hazardous area application.
Technical parameters
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Rated voltage: | loop powered |
| Power dissipation: | < 1 W |
| Connection side: | control side |
| Connection: | terminals 5, 6 |
| Rated voltage: | 19 ... 30 V DC |
| Current: | ≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load ≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output ≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output |
| Inrush current: | ≤ 200 mA after 100 µs |
| Connection side: | field side |
| Connection: | terminals 1+, 2- |
| Internal resistor: | max. 238 Ω |
| Current: | ≤ 45 mA |
| Voltage: | ≥ 12 V |
| Open loop voltage: | min. 22.7 V |
| Output rated operating current: | 45 mA |
| Output signal: | These values are valid for the rated operating voltage 19 ... 30 V DC. |
| Energized/De-energized delay: | single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs |
| Input/Output: | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
| Display elements: | LED |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21 |
| Degree of protection: | IEC 60529 |
| Protection against electrical shock: | UL 61010-1 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 100 g |
| Dimensions: | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-Type Examination Certificate: | BASEEFA 06 ATEX 0170 |
| Electromagnetic compatibility: Marking: | II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I |
| Electromagnetic compatibility: Output: | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Electromagnetic compatibility: Voltage: | 25.2 V |
| Electromagnetic compatibility: Current: | 110 mA |
| Electromagnetic compatibility: Power: | 693 mW |
| Input: Maximum safe voltage: | 250 V (Attention! The rated voltage can be lower.) |
| Certificate: | PF 06 CERT 0971 X |
| Input: Marking: | II 3G Ex nA IIC T4 Gc |
| Galvanic isolation: Input/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| FM approval: Control drawing: | 116-0419 (cFMus) |
| UL approval: Control drawing: | 116-0420 (cULus) |
| IECEx approval: | IECEx BAS 06.0032 |
| UL approval: Approved for: | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |