View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
225293
FI-PFH-NS0137-R
Request a Quote
Pepperl+Fuchs 225293
FI-PFH-NS0137-R
HART Termination Board FI-PFH-NS0137-R
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
This HART termination board has 16 terminal blocks to connect up to 16 HART field devices. It has an integrated, switchable 220 load resistor and an integrated ground capacitor. It also has terminal blocks for the 4 mA .. 20 mA signal to the DCS/ PLC. A 26-pin flat cable K-HM26 is used for connection of each HART Multiplexers KFD*-HM*-16 to the termination board. Other termination boards are available. Contact Pepperl+Fuchs for details.
Technical parameters
| Load resistor: | 220 Ω , switchable on |
| Type: | multiplexer connection : 26-pin NFP-26A (Yamaichi) |
| Rated current: | max. 30 mA per channel |
| Control elements: | DIP-switch |
| DIP switch: | selection of operating mode: - ON: without load resistor - OFF: with load resistor |
| Factory setting: | DIP switches S1 and S2: ON |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2012 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Ambient temperature: | 0 ... 50 °C (32 ... 122 °F) |
| Storage temperature: | -15 ... 50 °C (5 ... 122 °F) |
| Relative humidity: | ≤ 93 % non-condensing |
| Shock resistance: | 15 g , 11 ms |
| Vibration resistance: | 1 g , 10 ... 150 Hz |
| Degree of protection: | IP20 |
| Connection: Field side: | screw terminals , green |
| Connection: Control side: | screw terminals , green HART : 1 x IDC plug, 26-pin |
| Core cross-section: | screw terminals: 0.25 ... 1.5 mm2 (24 ... 16 AWG) |
| Mass: | approx. 200 g |
| Dimensions: | 110 x 125 x 67 mm (4.3 x 4.9 x 2.6 inch) |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Certificate: | PF 11 CERT 1930 X |
| Connection: Marking: | II 3G Ex nA IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |