222495
NJ15-M1-E2-V1
Inductive sensor
Series: VariKont M ®, Housing material: PBT/metal RAL 7011, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 4-pin, Degree of protection: IP67fa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 15 mm |
| Installation: | non-flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 12.15 mm |
| Actual operating distance: | 13.5 ... 16.5 mm typ. 15 mm |
| Reduction factor rAl: | 0.39 |
| Reduction factor rCu: | 0.36 |
| Reduction factor r304: | 0.73 |
| Operating voltage: | 10 ... 60 V DC |
| Switching frequency: | 0 ... 200 Hz |
| Hysteresis: | typ. 5 % |
| Reverse polarity protection: | yes |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 2.5 V |
| Voltage drop at IL: Voltage drop IL = 200 mA, switching element on: | 1 ... 2.5 V typ. 2.2 V |
| Rated insulation voltage: | 500 V |
| Operating current: | 0 ... 200 mA |
| No-load supply current: | ≤ 14 mA |
| Operating voltage indicator: | LED, green |
| Switching state indicator: | LED, yellow |
| MTTFd: | 932 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| EAC conformity: | TR CU 020/2011 |
| CCC approval: | Certified by China Compulsory Certification (CCC) |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type: | Connector M12 x 1 , 4-pin |
| Housing material: | PBT/metal RAL 7011 |
| Sensing face: | PBT |
| Degree of protection: | IP67 |
| ECCN: | |
| Country of Origin: | ID |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |