Pepperl+Fuchs
221586
MLV41-6/25/95/136
Pepperl+Fuchs 221586
MLV41-6/25/95/136
Retroreflective sensor
Description
The unique and extremely popular design of the MLV41 series enables it be mounted correctly in confined areas and offers all the functions that are normally only found on larger phototelectric sensors. The MLV41 series comes with a range of functions. For example, highly visible status LEDs on the front and back, resistance to ambient light, crosstalk protection and universally applicable output stages that permit every possible switching logic and polarity to be realized. The enhanced resistance to ambient light ensures reliable operation even where modern energy-saving lamps with electronic ballasts are in use. The same applies where multiple devices are present, i.e. the use of a number of sensors in the same vicinity causes no problems. Robust retroreflective sensor, compact housing design, 9.5 m detection range, red light, 2 push-pull outputs, M8 plug, Rugged series in corrosion-resistant metal housing, Extremely high switching frequency, Clear and functional display concept for the operating modes, Resistant against noise: reliable operation under all conditions, Aluminum housing with high quality Delta-Seal coatedfa
Technical parameters
| Effective detection range: | 0 ... 9.5 m |
| Reflector distance: | Foil reflector 0.05 ... 3 m Retro-reflector 0.01 ... 9.5 m |
| Threshold detection range: | 12 m |
| Reference target: | OFR-22800/76 , H85-2 reflector |
| Light source: | LED |
| Light type: | modulated visible red light , 625 nm |
| Polarization filter: | no |
| Angle deviation: | max. ± 1.5 ° |
| Diameter of the light spot: | approx. 300 mm at detection range 8.5 m |
| Angle of divergence: | 1.5 ° |
| Optical face: | frontal |
| Ambient light limit: | 20000 Lux |
| MTTFd: | 940 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator: | LED yellow, lights up when light beam is free, flashes when falling short of the stability control |
| Control elements: | none |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | max. 30 mA |
| Signal output: | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Voltage drop: | ≤ 2.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| UL approval: | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 75 °C (-40 ... 167 °F) |
| Housing width: | 31 mm |
| Housing height: | 56.5 mm |
| Housing depth: | 13.6 mm |
| Degree of protection: | IP67 |
| Connection: | M8 x 1 connector, 4-pin |
| Material: Housing: | Aluminum , Delta-Seal coated |
| Material: Optical face: | glass pane |
| Material: Connector: | metal |
| Mass: | 50 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |