219491
UGB-18GM50-255-2E3-150MM-V15-Y
Splice sensor
Ultrasonic system for splice detection, Sensor with mounting bracket, preassembled, Insensitive to printing, colors, and shining surfacesfa. Ultrasonic system for splice detection, Insensitive to printing, colors, and shining surfaces, Very high processing speeds are possible.fa
| Sensing range: | 20 ... 60 mm , optimal distance: 45 mm |
| Transducer frequency: | 255 kHz |
| LED green: | Display: readiness |
| LED yellow: | Display: splice detected |
| LED red: | Indication: No sheet detected (Air) |
| Operating voltage: | 18 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | < 60 mA |
| Input type: | Teach-In input 0-level: -UB ... -UB + 1V 1-level: +UB - 1 V ... +UB |
| Pulse length: | ≥ 500 ms |
| Impedance: | ≥ 10 kΩ |
| Output type: | 2 switch outputs PNP, NC |
| Rated operating current: | 2 x 100 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 3 V |
| Switch-on delay: | ≤ 600 µs |
| Switch-off delay: | ≤ 600 µs |
| Pulse extension: | ≥ 120 ms programmable |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | 0 ... 60 °C (32 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Connection type: | Cable connector M12 x 1 , 5-pin with PVC Cable, 150 mm |
| Degree of protection: | IP67 |
| Material: Housing: | nickel plated brass; plastic components: PBT |
| Material: Transducer: | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass: | 150 g |
| Cable length: | l1 = 0.3 m l2 = 0.15 m |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |