Pepperl+Fuchs
218993
ML8-8-H-100-RT/65a/103/143/162
Pepperl+Fuchs 218993
ML8-8-H-100-RT/65a/103/143/162
Background suppression sensor
Description
Small, robust and reliable, the ML8 series of miniature sensors is particularly suitable for non-contact detection of objects in confined spaces. The LED indicator is located behind the lens and provides reliable information on the sensor's operating status. The LED is always visible, even if the sensor is completely embedded. Flexible mounting options and fixed preset detection ranges simplify setup and operation. Background suppression sensor with special light spots for detecting PCBs, miniature design, 100 mm detection range (can be adjusted mechanically), red light, light on, PNP output, M8 plug, Diffuse mode sensor with multiple light spots, Specially designed for detecting critical objects such as PCBs, Detects objects in front of a close background through precise background suppression, Can be adapted to the application in question thanks to the adjustable detection rangefa
Technical parameters
| Detection range: | 20 ... 100 mm |
| Detection range min.: | 10 ... 25 mm |
| Detection range max.: | 25 ... 100 mm |
| Adjustment range: | 25 ... 100 mm |
| Reference target: | standard white, 100 mm x 100 mm |
| Light source: | LED |
| Light type: | modulated visible red light , 640 nm |
| Black/White difference (6 %/90 %): | < 20 % |
| Diameter of the light spot: | 2 light spots, 12 mm apart, spotsize 4 mm at a distance of 50 mm, 25 mm apart, spotsize 10 mm at a distance of 100 mm (outer spot to outer spot) |
| Ambient light limit: | EN 60947-5-2 |
| MTTFd: | 794 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Function indicator: | 2 LEDs yellow, light up in case of detection |
| Control elements: | Sensing range adjuster |
| Operating voltage: | 10 ... 30 V DC , class 2 |
| Ripple: | max. 10 % |
| No-load supply current: | < 15 mA |
| Switching type: | light on |
| Signal output: | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 500 Hz |
| Response time: | 1 ms |
| Product standard: | EN 60947-5-2 |
| UL approval: | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 23 mm |
| Housing height: | 31 mm |
| Housing depth: | 11 mm |
| Degree of protection: | IP67 |
| Connection: | M8 x 1 connector, 4-pin |
| Material: Housing: | PC (glass-fiber-reinforced Makrolon) |
| Material: Optical face: | PMMA |
| Material: Connector: | plastic |
| Mass: | approx. 10 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |