Pepperl+Fuchs
217778
UMC3000-30H-E5-5M-FA
Pepperl+Fuchs 217778
UMC3000-30H-E5-5M-FA
Ultrasonic sensor
Description
Single head system, Front of transducer and housing manufactured entirely from stainless steel, Hygienic design, easy to clean, Degree of protection IP68 / IP69K, Series: -30H, Housing: stainless steel 1.4404 / AISI 316L. LED window: VMQ Elastosil LR 3003/Shore 50 A, Connection type: cable PUR , 5 m , With FDA approvalfa. The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. Due to its special design, this sensor is EHEDG compliant, and together with an appropriate fixture are especially suitable for applications where there are increased hygiene requirements, such as in the manufacture and handling of food. For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used, even in applications without special hygiene requirements.
Technical parameters
| Sensing range: | 200 ... 3000 mm |
| Adjustment range: | 240 ... 3000 mm |
| Dead band: | 0 ... 200 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 100 kHz |
| Response delay: | ≤ 200 ms |
| LED green: | Operating display |
| LED yellow: | switching state |
| LED red: | error |
| Operating voltage: | 10 ... 30 V DC |
| No-load supply current: | ≤ 50 mA |
| Input/output type: | 1 synchronization connection, bidirectional |
| : 0 Level: | 0 ... 1 V |
| : 1 Level: | 4 V ... UB |
| : Input impedance: | > 12 kΩ |
| : Output rated operating current: | < 12 mA |
| : Pulse length: | ≥ 200 µs |
| : Pulse interval: | ≥ 2 ms |
| Synchronization frequency: Common mode operation: | ≤ 20 Hz |
| Synchronization frequency: Multiplex operation: | ≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 ) |
| Input type: | 1 program input |
| Level (switch point 1): | 0 ... 1 V |
| Level (switch point 2): | 4 V ... UB |
| Input impedance: | > 10 kΩ |
| Pulse length: | 2 ... 5 s |
| Output type: | 1 switching output E5, PNP NO/NC, programmable |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 2 V |
| Repeat accuracy: | ≤ 0.1 % of full-scale value |
| Switching frequency: | ≤ 2.8 Hz |
| Range hysteresis: | programmable , preset to 1 mm |
| Temperature influence: | < 1.5 % of full-scale value |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| EHEDG: | Type EL Class I AUX |
| ECOLAB: | yes |
| Ambient temperature: | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | cable PUR , 5 m , With FDA approval |
| Core cross-section: | 5 x 0.5 mm2 |
| Degree of protection: | IP68 / IP69K |
| Material: Housing: | stainless steel 1.4404 / AISI 316L LED window: VMQ Elastosil LR 3003/Shore 50 A |
| Material: Transducer: | Stainless steel 1.4435 / AISI 316L |
| Mass: | 425 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |