Pepperl+Fuchs
209349
SC-GPDD-DO32-PF
Pepperl+Fuchs 209349
SC-GPDD-DO32-PF
Termination Board
Description
The Termination Board has 16 plug-in slots. System board for Honeywell Experion PKS, Series C, For 32-channel card CC-TDOB01/11, For 16 modules, Recommended module: HiD2874 (DO), Recommended system cable: CAB-HON-**-S37C32-MX-01000, 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: Sub-D connector (male), 37-pinpa. The function of the Termination Board as well as the connector pin assignment exactly fit the requirement of Honeywell systems. Information about missing supply voltage of the interface modules is available for the system as potential free relay contact. Wiring errors from field will be reported if the interface module supports this function. The Termination Boards are supplied with a robust glass fibre reinforced plastic housing as standard. This design permits the fast and reliable installation in the switch cabinet.
Technical parameters
| Connection: | terminal block TB3 (1-, 2+; 3-, 4+) |
| Nominal voltage: | 24 V DC , in consideration of rated voltage of used isolators |
| Voltage drop: | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Ripple: | ≤ 10 % |
| Fusing: | 4 A |
| Power dissipation: | ≤ 500 mW , without modules |
| Reverse polarity protection: | yes |
| Supply: | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Output type: | volt-free contact |
| Contact loading: | 30 V DC , 1 A |
| Display elements: | LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2017 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP20 |
| Connection: Field side: | explosion hazardous area: pluggable screw terminals , blue |
| Connection: Control side: | non-explosion hazardous area: 37-pin Sub-D connector |
| Connection: Supply: | pluggable screw terminals , black |
| Connection: Fault output: | pluggable screw terminals , black |
| Core cross-section: | screw terminals: 0.25 ... 2.5 mm2 (24 ... 12 AWG) |
| Material: | housing: polycarbonate |
| Mass: | approx. 925 g |
| Dimensions: | 357 x 155 x 153 mm (L x W x H) , height including module assembly |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-Type Examination Certificate: | CESI 11 ATEX 062 |
| Connection: Marking: | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Non-hazardous area: Maximum safe voltage: | 250 V (Attention! Um is no rated voltage.) |
| Galvanic isolation: Field circuit/control circuit: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000 |
| CSA approval: Control drawing: | see control drawing of correspoding modules |
| IECEx approval: IECEx certificate: | IECEx CES 11.0022 |
| IECEx approval: IECEx marking: | [Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Designation: | provided accessory: Label Carrier HiALC-HI*TF-SET-1** optional accessories: system cable CAB-HON-**-S37C32-MX-01000 |
Logistic parameters
| ECCN: | |
| Country of Origin: | Singapur |
| EAN: | 4050143061440 |
| Weight: | 1.16 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |