Pepperl+Fuchs
205416
ML4.2-8-H-20-RT/40b/110/115b
Pepperl+Fuchs 205416
ML4.2-8-H-20-RT/40b/110/115b
Background suppression sensor
Description
The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs. Triangulation sensor with background suppression for complex applications, miniature design, 20 mm detection range, red light, light/dark on, push-pull output, fixed cable with M8 plug, Precise background suppression, Very small black-white difference, Small, sharp light spot, Highly visible LEDs for Power-On, switching status, short-circuit, and undervoltage, Metal-reinforced fastening holesfa
Technical parameters
| Detection range: | 7 ... 20 mm |
| Detection range max.: | 5 ... 25 mm |
| Background suppression: | starts from 25 mm |
| Light source: | LED |
| Light type: | modulated visible red light , 660 nm |
| Black/White difference (6 %/90 %): | approx. 1 mm |
| Diameter of the light spot: | approx. 1.5 mm at 20 mm |
| Angle of divergence: | approx. 5 ° |
| Ambient light limit: Continuous light: | 40000 Lux |
| Ambient light limit: Modulated light: | 5000 Lux |
| MTTFd: | 1940 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator: | LED yellow: lights when object is detected |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | < 25 mA |
| Switching type: | light/dark on electrically switchable |
| Signal output: | Push-pull output, short-circuit protected, reverse polarity protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Voltage drop: | ≤ 2.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| Standard conformity: Shock and impact resistance: | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Standard conformity: Vibration resistance: | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| CE conformity: | yes |
| UL approval: | cULus Listed |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -20 ... 75 °C (-4 ... 167 °F) |
| Housing width: | 13.9 mm |
| Housing height: | 31.4 mm |
| Housing depth: | 18 mm |
| Degree of protection: | IP67 / IP69K |
| Connection: | 300 mm fixed cable with M12 x 1, 4-pin connector |
| Material: Housing: | ABS |
| Material: Optical face: | glass pane |
| Material: Cable: | PUR |
| Mass: | approx. 15 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.06 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |