205340
UB800-18GM40-I-V1
Ultrasonic sensor
Single head system, Short design, 40 mm, Function indicators visible from all directions, Analog output 4 mA ... 20 mA, Series: -18GM, Housing: brass, nickel-plated, Connection type: Connector plug M12 x 1 , 4-pinfa
| Sensing range: | 50 ... 800 mm |
| Adjustment range: | 70 ... 800 mm |
| Dead band: | 0 ... 50 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 255 kHz |
| Response delay: | approx. 100 ms |
| LED green: | Power on |
| LED yellow: | solid yellow: object in the evaluation range yellow, flashing: program function, object detected |
| LED red: | solid red: Error red, flashing: program function, object not detected |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | ≤ 20 mA |
| Input type: | 1 program input lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s |
| Output type: | 1 analog output 4 ... 20 mA, short-circuit/overload protected |
| Default setting: | evaluation limit A1: 70 mm evaluation limit A2: 800 mm |
| Resolution: | 0.4 mm at max. sensing range |
| Deviation of the characteristic curve: | ± 1 % of full-scale value |
| Repeat accuracy: | ± 0.5 % of full-scale value |
| Load impedance: | 0 ... 300 Ω at UB > 10 V; 0 ... 500 Ω at UB > 15 V |
| Temperature influence: | ± 1.5 % of full-scale value |
| Standard conformity: Standards: | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| EAC conformity: | TR CU 020/2011 TR CU 037/2016 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Degree of protection: | IP67 |
| Material: Housing: | brass, nickel-plated |
| Material: Transducer: | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass: | 25 g |
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |