Pepperl+Fuchs 202069

UB250-F12P-EP-V15

Ultrasonic sensor

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

Ultrasonic direct detection sensor, Switching point adjustment via potentiometer, Selectable sound lobe width, Synchronization options, Series: -F12, Housing: Frame: nickel plated, die cast zinc,. Laterals: glass-fiber reinforced plastic PC, Connection type: Connector M12 x 1 , 5-pinfa

Technical parameters

Sensing range: 20 ... 250 mm
Adjustment range: 25 ... 250 mm
Dead band: 0 ... 20 mm
Standard target plate: 100 mm x 100 mm
Transducer frequency: approx. 400 kHz
Response delay: approx. 20 ms
LED green: Operating display
LED yellow: switch output
LED red: solid: stop plate switch point adjuster flashing: error
Operating voltage: 10 ... 30 V DC , ripple 10 %SS
No-load supply current: ≤ 25 mA
Synchronization: 1 synchronous connection, bi-directional 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 kΩ synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency: Common mode operation: max. 200 Hz
Synchronization frequency: Multiplex operation: ≤ 200/n Hz, n = number of sensors
Input type: 1 input for sound lobe adjustment small sound beam: -UB ... +1 V wide sound beam: +4 V ... +UB or open input input impedance: > 10 kΩ switching delay: 1 s
Output type: Push-pull output, short-circuit protected, reverse polarity protected
Rated operating current: 200 mA , short-circuit/overload protected
Default setting: Switching point: 250 mm output behavior: NO contact
Voltage drop: ≤ 3 V
Repeat accuracy: ≤ 1 %
Switching frequency: 20 Hz
Range hysteresis: 1 % of the set operating distance
Temperature influence: ± 1.5 % of full-scale value
UL approval: cULus Listed, General Purpose
CSA approval: cCSAus Listed, General Purpose
Ambient temperature: -15 ... 70 °C (5 ... 158 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Connection type: Connector M12 x 1 , 5-pin
Degree of protection: IP54
Material: Housing: Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC
Material: Transducer: epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT
Mass: 60 g

Logistic parameters

ECCN:
Country of Origin: SG
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m