View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
194926
RL28-8-H-1500-LAS/47/115b
Request a Quote
Pepperl+Fuchs 194926
RL28-8-H-1500-LAS/47/115b
Background suppression sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Background suppression sensor, Universal series with highly versatile fields of use, Resistant against noise: reliable operation under all conditions, Laser version for long ranges, Small light beam diameter for detection of small partsfa
Technical parameters
| Detection range: | 100 ... 1500 mm |
| Detection range min.: | 50 ... 200 mm |
| Detection range max.: | 100 ... 1500 mm |
| Background suppression: | max. + 10 % of the upper limit of the detection range |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 650 nm |
| Laser nominal ratings: Beam divergence: | < 1.5 mrad |
| Laser nominal ratings: Pulse length: | 4.5 µs |
| Laser nominal ratings: Repetition rate: | approx. 1.5 kHz |
| Laser nominal ratings: max. pulse energy: | 17 nJ |
| Light spot representation: | max. 1.5 mm x 4 mm , light spot perpendicular to housing |
| Black/White difference (6 %/90 %): | ≤ 40 % |
| Ambient light limit: | 50000 Lux |
| MTTFd: | 590 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow ON: object inside the scanning range OFF: object outside the scanning range |
| Control elements: | Sensing range adjuster , Light-on/dark-on changeover switch |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 40 mA |
| Protection class: | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Time delay before availability: | ≤ 2 s |
| Switching type: | light/dark on, switchable |
| Signal output: | 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 200 mA |
| Switching frequency: | 140 Hz |
| Response time: | 3.5 ms |
| Product standard: | EN 60947-5-2 |
| Laser safety: | EN 60825-1 |
| Protection class: | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -25 ... 75 °C (-13 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 54.3 mm |
| Degree of protection: | IP67 |
| Connection: | 0.2 m fixed cable with 4-pin, M12 connector |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | Plastic pane |
| Mass: | approx. 70 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |