View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
191243
UC2000-30GM-2EP-IO-V15
Request a Quote
Pepperl+Fuchs 191243
UC2000-30GM-2EP-IO-V15
Ultrasonic sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Single head system, IO-link interface for service and process data, Programmable via DTM with PACTWARE, 2 programmable switch outputs, Series: -30GM, Housing: Stainless steel 1.4305 / AISI 303. TPU. Polyamides, Connection type: Connector plug M12 x 1 , 5-pinfa
Technical parameters
| Sensing range: | 90 ... 2000 mm |
| Adjustment range: | 120 ... 2000 mm |
| Dead band: | 0 ... 90 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 200 kHz |
| Response delay: | minimum : 65 ms factory setting: 125 ms |
| LED green: | solid: Power on flashing: Standby mode or IO link communication |
| LED yellow 1: | solid: Object in evaluation range flashing: Learning function, object detected |
| LED yellow 2: | solid: Object in evaluation range flashing: Learning function, object detected |
| LED red: | solid red: Error red, flashing: program function, object not detected |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | ≤ 60 mA |
| Power consumption: | ≤ 1 W |
| Interface type: | IO-Link |
| Protocol: | IO-Link V1.0 |
| Transfer rate: | Acyclical: typical 95 Bit/s |
| Cycle time: | min. 33.6 ms |
| Process data width: | 16 bit |
| SIO mode support: | yes |
| Input/output type: | 1 synchronization connection, bidirectional |
| : 0 Level: | 0 ... 1 V |
| : 1 Level: | 4 V ... UB |
| : Input impedance: | > 12 kΩ |
| : Output rated operating current: | < 12 mA |
| : Pulse length: | 0.5 ... 300 ms (level 1) |
| : Pulse interval: | ≥ 33 ms (level 0) |
| Synchronization frequency: Common mode operation: | ≤ 30 Hz |
| Synchronization frequency: Multiplex operation: | ≤ 33 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ) |
| Output type: | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 2.5 V |
| Repeat accuracy: | ≤ 0.1 % of full-scale value |
| Switching frequency: | ≤ 4 Hz |
| Range hysteresis: | 1 % of the adjusted operating range (default settings), programmable |
| Temperature influence: | ≤ 1.5 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 5-pin |
| Degree of protection: | IP67 |
| Material: Housing: | Stainless steel 1.4305 / AISI 303 TPU Polyamides |
| Material: Transducer: | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass: | 72 g |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |