182911
NCN12-18GM50-Z7-V1
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 2-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP67fa
| Switching function: | Normally closed (NC) |
| Output type: | Two-wire |
| Rated operating distance: | 12 mm |
| Installation: | non-flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 9.1 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.4 |
| Reduction factor r304: | 0.75 |
| Reduction factor rBrass: | 0.55 |
| Output type: | 2-wire |
| Operating voltage: | 3.5 ... 30 V |
| Switching frequency: | 0 ... 1000 Hz |
| Reverse polarity protection: | reverse polarity-conductive |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 3.5 V |
| Temperature drift: | ± 15% |
| Operating current: | 2 ... 100 mA |
| Off-state current: | typ. 0.8 mA |
| Switching state indicator: | LED, yellow |
| MTTFd: | 1556 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | brass, nickel-plated |
| Sensing face: | PBT |
| Degree of protection: | IP67 |
| ECCN: | |
| Country of Origin: | Indonesien |
| EAN: | 4050143016518 |
| Weight: | 0.05 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |