View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
133238
KFD0-SD2-Ex1.1065
Request a Quote
Pepperl+Fuchs 133238
KFD0-SD2-Ex1.1065
Solenoid Driver
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
1-channel isolated barrier, 24 V DC supply (loop powered), Current limit 65 mA at 9.8 V DC, Up to SIL 3 acc. to IEC 61508pa. This isolated barrier is used for intrinsic safety applications. It supplies power to solenoids, LEDs, and audible alarms located in a hazardous area. It is loop powered, so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage. At full load, 9.8 V at 65 mA is available for the hazardous area application.
Technical parameters
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Rated voltage: | loop powered |
| Power dissipation: | < 1 W (≤ 30 V) |
| Connection side: | control side |
| Connection: | terminals 7, 8 |
| Rated voltage: | 20 ... 35 V DC |
| Current: | 72 mA at 20 V input voltage, load = 150 Ω 50 mA at 35 V input voltage, load = 150 Ω |
| Connection side: | field side |
| Connection: | terminals 1+, 2- |
| Internal resistor: | ≤ 90 Ω |
| Current: | ≤ 65 mA |
| Voltage: | ≥ 9.8 V |
| Open loop voltage: | min. 15.4 V |
| Output rated operating current: | 65 mA |
| Output signal: | These values are valid for the rated operating voltage 20 ... 35 V DC. |
| Energized/De-energized delay: | single operation: 300 µs/50 µs; periodical: 5 µs / 50 µs |
| Display elements: | LED |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | UL 61010-1:2004 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 100 g |
| Dimensions: | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate: | BASEEFA 06 ATEX 0252 |
| Electromagnetic compatibility: Marking: | II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I (-20 °C ≤ Tamb ≤ 60 °C) |
| Electromagnetic compatibility: Voltage: | 17.22 V |
| Electromagnetic compatibility: Current: | 220 mA |
| Electromagnetic compatibility: Power: | 947 mW |
| Input: Maximum safe voltage: | 250 V (Attention! The rated voltage can be lower.) |
| Certificate: | TÜV 99 ATEX 1499 X |
| Input: Marking: | II 3G Ex nA II T4 [device in zone 2] |
| Galvanic isolation: Input/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| FM approval: Control drawing: | 116-0309 |
| UL approval: Control drawing: | 116-0316 (cULus) |
| IECEx approval: IECEx certificate: | IECEx BAS 06.0058 IECEx CML 19.0093X |
| IECEx approval: IECEx marking: | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Logistic parameters
| ECCN: | |
| Country of Origin: | SG |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |