Pepperl+Fuchs
132450
RL28-55/47/82b/105/106
Pepperl+Fuchs 132450
RL28-55/47/82b/105/106
Retroreflective sensor
Description
Retroreflective sensor with polarization filter, Universal series with highly versatile fields of use, Resistant against noise: reliable operation under all conditions, Version with red light, Version with heated front panelfa. The series 28 family of sensors can be universally used. It has a large range of models that allows it to be integrated into any automation environment. The sensors are contained in sturdy water resistant plastic housings with multiple fastening options and scratch resistant optical cover. Features such as a timer function, and functions including a light/dark switch, sensitivity adjuster and highly visible status LEDs make for less effort on the part of the user and streamline installation, setup and operation. Just about any task associated with positioning, moving, conveying and monitoring can be accomplished with these sensors.
Technical parameters
| Effective detection range: | 0 ... 17 m |
| Reflector distance: | 0.05 ... 17 m |
| Threshold detection range: | 21 m |
| Reference target: | H85-2 reflector |
| Light source: | LED |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 290 mm at a distance of 17 m |
| Angle of divergence: | emitter 1.2° receiver 2° |
| Ambient light limit: | 80000 Lux |
| MTTFd: | 950 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Control elements: | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Operating voltage: | 24 V DC ± 20 % |
| Ripple: | 10 % |
| No-load supply current: | ≤ 70 mA |
| Pre-fault indication output: | 1 PNP, inactive when falling short of the stability control for 10;s immediately inactive if 4 light beam interruptions take place |
| Switching type: | light/dark on switchable |
| Signal output: | 2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 2 A |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| Protection class: | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 75 °C (-40 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 54.3 mm |
| Degree of protection: | IP67 |
| Connection: | 5-pin, M12 x 1 connector |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | Plastic pane |
| Mass: | 70 g |
| Note: | Heated lens |
Logistic parameters
| ECCN: | |
| Country of Origin: | VN |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |