131633
LS610-DA-P/F2
Optical data coupler
Optical data coupler for PROFIBUS, 120 m detection range, infrared light, M12 plug, Devices for PROFIBUS, Problem-free light beam interruption due to TVT (Telegram Verification Technology), Plug connection for fast mounting, Simple programming without opening the device, Usable up to detection range 0fa
| Effective detection range: | 0 ... 120 m |
| Threshold detection range: | 140 m |
| Light type: | modulated infrared light |
| Diameter of the light spot: | 2 m at a distance of 100 m |
| Angle of divergence: | 1.1 ° |
| Ambient light limit: | > 10000 Lux |
| MTTFd: | 250 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Data flow indicator: | LED green: emitter LED yellow: receiver LED red: faulty telegram |
| Function indicator: | alignment aid: flashing front red LED Signal strength (8 LED: Red, yellow, green) Baudrate, operating mode |
| Control elements: | membrane keys, 2 keys, can be electrically locked |
| Operating voltage: | 18 ... 30 V DC |
| No-load supply current: | 200 mA |
| Data rate: | 93.75; 187.5;(350); 500;1500 kBit/s , adjustable |
| Operation frequency: | F2 = 12.5 MHz |
| Interface type: | PROFIBUS, galvanically isolated |
| Function input: | Keylock, internal Pull-up resistor keypad locked with 0 V |
| Pre-fault indication output: | 1 PNP (switches if there is sufficient stability control) short-circuit protected, max. 200 mA |
| Product standard: | EN 60947-5-2 |
| Approvals: | CE, cULus |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
| Degree of protection: | IP65 |
| Connection: | 4-pin, M12x1 connector, standard (supply) , 5-pin, M12x1 connector, B-coded (Bus In) , 5-pin, M12x1 socket, B-coded (Bus Out/Termination) |
| Material: Housing: | ABS / PC |
| Material: Optical face: | plastic |
| Mass: | 700 g |
| ECCN: | |
| Country of Origin: | DE |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |